Spokane vs Kirkland Water Quality

Side-by-side water quality comparison for two Washington cities.

If you are comparing Spokane and Kirkland water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.

Hardness comparison

Spokane has significantly harder water at 104 PPM versus Kirkland at 12 PPM, a difference of 92 PPM. Kirkland residents generally do not need any water softening equipment.

Water sources and why they differ

Water sources differ: Spokane draws from Spokane-Rathdrum Aquifer, while Kirkland uses Seattle Water (Cedar/Tolt Rivers). Both use similar source types, but local geology creates the hardness variation.

What this means for you

Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.

MetricSpokaneKirkland
Hardness104 PPM12 PPM
GPG6.10.7
TDS156 PPM32 PPM
Highest PFOA/PFOS3.1 pptNot detected (reporting limit 4 ppt)
Lead2 ppbNot reported to EPA
Chlorine0.7 mg/L1 mg/L
LevelModerately HardSoft

FAQ

Which has harder water, Spokane or Kirkland?
Spokane has harder water at 104 PPM compared to Kirkland at 12 PPM. That is a difference of 92 PPM.
Do I need a water softener if I move from Kirkland to Spokane?
Probably not. At 104 PPM, the water is manageable without a softener for most homes.
Is Kirkland water safe to drink?
Kirkland's water system has no EPA health-limit violations since November 2023. PFOA and PFOS were below EPA's 4 ppt standard in UCMR 5 testing.