Is Kirkland, WA Tap Water Safe to Drink?

–
Incomplete dataNot enough EPA data to grade

No EPA health-limit violations for Kirkland's water system since November 2023, but some data is missing. Not available: no lead result has been reported to EPA.

Kirkland City of (EPA ID WA5342250) · Source: Surface water (purchased) from Seattle Public Utilities · System serves 69,243 people

Data as of · EPA violations: as of October 14, 2026 · Lead: not reported to epa · PFAS & lithium: EPA UCMR 5, Sep 2024–Jun 2025 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Kirkland City of

No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Kirkland City of since November 2023.

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID WA5342250. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

12
Hardness (PPM, est.)
35
WA Average
136
National Avg
ND
PFOA/PFOS not detected (reporting limit 4 ppt)
–
Lead: no recent data
12 PPM Soft
CONTAMINANT LEVELS Hardness (est.) 12 PPM TDS (est.) 32 PPM PFOA/PFOS ND Chlorine (est.) 1 mg/L Nitrate 0.062 mg/L
Estimated water hardness gauge for Kirkland WA showing 12 PPM SoftWater quality levels in Kirkland WA compared to EPA limits - estimated hardness 12 PPM, PFOA/PFOS not detected (reporting limit 4 ppt)

Hardness Scale: Where Kirkland Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+

How Kirkland Compares

Kirkland's water is 91% softer than the national average of 136 PPM - ranking in the bottom 99% for hardness nationwide. Most homes here do not need a softener. Within Washington, it ranks #24 of 24 cities (66% below the state average of 35 PPM). Among cities (50k-100k), Kirkland ranks #259 of 260 for hardness.

What Kirkland's Water Means for Your Home

Hardness: 12 PPM - Low Concern

Kirkland's water is soft at just 12 PPM. That's good news for your plumbing, appliances, and skin. Scale buildup is a non-issue here, and a water softener would be a waste of money. Kirkland is softer than 99% of US cities. If you're thinking about water treatment in Kirkland, contaminant filtration is the place to invest.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Kirkland's water has TTHMs at 25.7 ppb and HAA5 at 20.9 ppb — below the legal limits in EWG's data, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Kirkland's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 25.7 ppb (32% of the legal limit, but 171x the EWG guideline) and HAA5 at 20.9 ppb (35% of the legal limit, but 209x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.0883 ppb, which is 4.4x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

Water quality contaminant levels for Kirkland, WA
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
↳ Total PFAS (average of all samples)None detected (EPA reporting limits 3–20 ppt)—No total limitNot detected
Lead (90th percentile)Not reported to EPA0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)No data
Nitrate (EWG data)0.062 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~12 PPMNot a health issueNo federal limitOK
Total Dissolved Solids (estimate)~32 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Sep 2024–Jun 2025)

Average across 4 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Good news for Kirkland residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.

Quick Fix for Chlorine: Shower Filter

At 1 mg/L chlorine, many Kirkland residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Kirkland

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. Worth it if you have specific health concerns.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request City of Kirkland's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Kirkland's Water Supply

Water Utility: City of Kirkland

Water Source: Seattle Water (Cedar/Tolt Rivers) (Surface Water)

Population Served: 69,243

Hardness: 12 PPM (0.7 grains per gallon)

Kirkland's drinking water comes from surface sources — Seattle Water (Cedar/Tolt Rivers). Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 69,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Kirkland's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Kirkland

This report is for the water system serving Kirkland, WA (City of Kirkland). ZIP codes in and near this area:

98011, 98020, 98021, 98028, 98033, 98034, 98036, 98041, 98043, 98046, 98083

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Compare Kirkland to Other Washington Cities

Frequently Asked Questions About Kirkland Water

Is Kirkland tap water safe to drink?
No EPA health-limit violations for Kirkland's water system since November 2023, but some data is missing. there is no recent lead result. This describes the water system; your home's plumbing can still add lead, so a tap test is how to be sure. Separately, 10 contaminants exceed the stricter health guidelines published by the Environmental Working Group (EWG), which are not legal limits.
Where does Kirkland's water come from?
Kirkland's drinking water is sourced from Seattle Water (Cedar/Tolt Rivers) and treated by City of Kirkland. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Kirkland?
At 12 PPM, Kirkland's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Kirkland's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Kirkland has TTHMs at 25.7 ppb and HAA5 at 20.9 ppb (EWG Tap Water Database) — below the legal limits in EWG's data, but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Kirkland's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.0883 ppb, which is 4.4x the EWG health guideline. There's no separate federal limit for chromium-6. It can come from industrial sources or natural geology. Reverse osmosis is the most effective removal method.
Why does Kirkland water taste like chlorine?
Kirkland's water contains 1 mg/L of chlorine. Chlorine is essential for safety but creates the "pool water" taste. Easiest fix: an activated carbon filter. For skin and hair in the shower, a shower filter ($30-$40) installs in minutes.
Can I drink Kirkland tap water straight from the faucet?
Kirkland's water system has no EPA health-limit violations since November 2023. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
How does Kirkland compare to the Washington average?
Kirkland's water is 66% softer than the Washington average. It ranks #24 out of 24 cities we track in the state for hardness. Nationally, Kirkland is softer than 99% of US cities in our database.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Kirkland Homes

Common purchases for homes with 12 PPM water.

Affiliate disclosure: we may earn a commission. Selection based on Kirkland's water data.

On a private well? This report covers Kirkland's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Kirkland in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →