Moore vs Norman Water Quality
Side-by-side water quality comparison for two Oklahoma cities.
If you are comparing Moore and Norman water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Moore has somewhat harder water at 280 PPM versus Norman at 236 PPM, a difference of 44 PPM. At 280 PPM, Moore residents should budget for a water softener ($600-$1,500 installed). Without one, expect scale buildup on fixtures, reduced water heater efficiency, extra soap and detergent use, and shorter appliance lifespans. Norman also has hard water but to a lesser degree.
Both cities have hard water, but Moore's higher hardness means more aggressive scale buildup and higher household impact.
Water sources and why they differ
Water sources differ: Moore draws from Lake Draper + Stanley Draper, while Norman uses Lake Thunderbird. Both use similar source types, but local geology creates the hardness variation.
What this means for you
If you are moving from Norman to Moore, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Moore | Norman |
|---|---|---|
| Hardness | 280 PPM | 236 PPM |
| GPG | 16.4 | 13.8 |
| TDS | 430 PPM | 276 PPM |
| Highest PFOA/PFOS | Not detected (reporting limit 4 ppt) | Not detected (reporting limit 4 ppt) |
| Lead | 0 ppb | 0 ppb |
| Chlorine | 1.4 mg/L | 0.7 mg/L |
| Level | Extremely Hard | Very Hard |