Is Moore, OK Tap Water Safe to Drink?
EPA data shows a health concern for Moore's water system. Specifically: 1 EPA health-limit violation since November 2023 (Lead and Copper Rule Revisions, Arsenic). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 280 PPM (extremely hard), which causes scale in plumbing and appliances.
EPA health violations for Moore Public Works Authority
- Lead and Copper Rule Revisions: Required treatment step not met · Oct 2024 · Returned to compliance
- Arsenic: Exceeded a health-based limit · Oct 2024–Dec 2024 · measured 0.014 mg/l · limit 0.010 mg/L · Returned to compliance
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID OK2001412. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Moore Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Moore Compares
Moore's water is 106% harder than the national average of 136 PPM. It ranks #84 out of 914 cities in our database (harder than 91% of US cities we track). Within Oklahoma, Moore has the 2nd hardest water out of 11 cities - 32% above the state average of 212 PPM. Among cities (50k-100k), Moore ranks #27 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.
What Moore's Water Means for Your Home
Hardness: 280 PPM - Treatment Recommended
Moore has some extremely hard water. At 280 PPM (16.4 grains per gallon), your tap is loaded with mineral content carried in from the watershed geology. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 280 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Moore homeowners don't realize it until the plumber shows up. That's 32% harder than the Oklahoma average.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Moore's water has TTHMs at 43.8 ppb and HAA5 at 26.7 ppb — below the legal limits in EWG's data, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Moore's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 43.8 ppb (55% of the legal limit, but 292x the EWG guideline) and HAA5 at 26.7 ppb (45% of the legal limit, but 267x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 16.9 ppb, which is 845x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
How Hard Water Affects Your Home
At 280 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| PFOS (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| ↳ Total PFAS (average of all samples) | None detected (EPA reporting limits 3–20 ppt) | — | No total limit | Not detected |
| Lead (90th percentile, Dec 2025) | 0 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Nitrate (EWG data) | 0.168 mg/L | 5 mg/L (CheckMyTap flag, half the limit) | 10 mg/L | ✓ OK |
| Hardness (estimate) | ~280 PPM | Not a health issue | No federal limit | Very hard |
| Total Dissolved Solids (estimate) | ~430 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~1.4 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Aug 2023–Jul 2024)
Average across 48 samples: 12.38 µg/L. Highest single result: 24.8 µg/L. 15 of 48 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Our Top Picks for Moore (280 PPM)
Hard water at 280 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Quick Fix for Chlorine: Shower Filter
At 1.4 mg/L chlorine, many Moore residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Moore
With 280 PPM hardness, a quick test strip confirms whether your specific tap matches Moore's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request City of Moore Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Moore's Water Supply
Water Utility: City of Moore Water
Water Source: Lake Draper + Stanley Draper (Surface Water)
Population Served: 55,083
Hardness: 280 PPM (16.4 grains per gallon)
Moore's drinking water comes from surface sources — Lake Draper + Stanley Draper. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 55,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Moore Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Moore
This report is for the water system serving Moore, OK (City of Moore Water). ZIP codes in and near this area:
73020, 74804, 74851, 74857
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Water Softener Sizing for Moore
At 280 PPM (16.4 GPG), here is how to size a softener for your Moore home. Multiply hardness in GPG (16.4) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 16.4 GPG × 300 gal = 4,920 grains/day. Over a 7-day regeneration cycle, that is 34,440 grains - a 40,000-grain softener is the right fit for most Moore households.
Compare Moore to Other Oklahoma Cities
Frequently Asked Questions About Moore Water
Is Moore tap water safe to drink?
Where does Moore's water come from?
Do I need a water softener in Moore?
Does Moore water damage tankless water heaters?
How much does hard water cost a Moore household per year?
What is the hardness of Moore water in grains per gallon?
What size water softener do I need for Moore?
Salt-based softener or salt-free conditioner for Moore?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.
Common Options for Moore Homes
Prioritized for contaminant reduction for homes with 280 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Moore's water data.