Is Brooklyn Park, MN Tap Water Safe to Drink?
EPA data shows a health concern for Brooklyn Park's water system. Specifically: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOA 10 ppt, PFOS 9.5 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 240 PPM (very hard), which causes scale in plumbing and appliances.
EPA health violations for Brooklyn Park
No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Brooklyn Park since November 2023.
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID MN1270005. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Brooklyn Park Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Brooklyn Park Compares
Brooklyn Park's water is 76% harder than the national average of 136 PPM. It ranks #189 out of 914 cities in our database (harder than 79% of US cities we track). Within Minnesota, it ranks #10 of 15 cities (10% above the state average of 219 PPM). Among cities (50k-100k), Brooklyn Park ranks #69 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.
What Brooklyn Park's Water Means for Your Home
Hardness: 240 PPM - Treatment Recommended
Brooklyn Park has some seriously hard water. At 240 PPM (14 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 240 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Brooklyn Park homeowners don't realize it until the plumber shows up. That's 10% harder than the Minnesota average.
Contaminants & Safety
Forever chemicals (PFAS) are a serious concern here. Brooklyn Park has PFOA at 10 ppt and PFOS at 9.5 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction — that's the certification that specifically tests for PFAS removal.
What's in the Treatment Process
Even though Brooklyn Park draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 29.3 ppb and HAA5 at 9.55 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. The EWG-reported levels are below the legal limits but above the stricter EWG health guidelines.
Chromium-6 is naturally present in Brooklyn Park's aquifer geology at 0.0438 ppb — 2.2x the EWG health guideline. There's no federal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
How Hard Water Affects Your Home
At 240 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | 10 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ⚠ Above |
| PFOS (highest entry-point avg.) | 9.5 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ⚠ Above |
| ↳ Total PFAS (average of all samples) | 20.46 ppt | — | No total limit | Detected |
| Lead (90th percentile, Dec 2025) | 1 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Nitrate (EWG data) | 0.016 mg/L | 5 mg/L (CheckMyTap flag, half the limit) | 10 mg/L | ✓ OK |
| Hardness (estimate) | ~240 PPM | Not a health issue | No federal limit | Very hard |
| Total Dissolved Solids (estimate) | ~382 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~0.4 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Nov 2024–Apr 2025)
Average across 10 samples: 3.92 µg/L. Highest single result: 11.7 µg/L. 0 of 10 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Recommendations for Brooklyn Park Homes
Our Top Picks for Brooklyn Park (240 PPM)
Hard water at 240 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Recommended Filter for Brooklyn Park
PFAS exceed EPA limits (PFOA: 10 ppt, PFOS: 9.5 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.
How to Test Your Water in Brooklyn Park
With PFAS at 20.46 ppt in Brooklyn Park's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.
Free option: Request City of Brooklyn Park Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Brooklyn Park's Water Supply
Water Utility: City of Brooklyn Park Water
Water Source: Mississippi River & wells (Groundwater)
Population Served: 89,995
Hardness: 240 PPM (14 grains per gallon)
Brooklyn Park draws its drinking water from groundwater sources — Mississippi River & wells. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 90,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Brooklyn Park Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Brooklyn Park
This report is for the water system serving Brooklyn Park, MN (City of Brooklyn Park Water). ZIP codes in and near this area:
55112, 55316
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Water Softener Sizing for Brooklyn Park
At 240 PPM (14 GPG), here is how to size a softener for your Brooklyn Park home. Multiply hardness in GPG (14) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 14 GPG × 300 gal = 4,200 grains/day. Over a 7-day regeneration cycle, that is 29,400 grains - a 32,000-grain softener is the right fit for most Brooklyn Park households.
Compare Brooklyn Park to Other Minnesota Cities
Frequently Asked Questions About Brooklyn Park Water
Is Brooklyn Park tap water safe to drink?
Where does Brooklyn Park's water come from?
Do I need a water softener in Brooklyn Park?
How do I remove PFAS from Brooklyn Park tap water?
What water filter is best for Brooklyn Park?
Is Brooklyn Park water safe for babies and infants?
Does Brooklyn Park water damage tankless water heaters?
Do I need both a softener AND a filter in Brooklyn Park?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.
Common Options for Brooklyn Park Homes
Prioritized for contaminant reduction for homes with 240 PPM water and PFAS above EPA limits.
Affiliate disclosure: we may earn a commission. Selection based on Brooklyn Park's water data.