Is Kissimmee, FL Tap Water Safe to Drink?
Yes, Kissimmee tap water is safe to drink. No contaminants exceed health guidelines. However, Kissimmee has very hard water at 259 PPM, which will cause scale buildup in plumbing and appliances over time. A water softener is worth considering.
Hardness Scale: Where Kissimmee Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Kissimmee Compares
Kissimmee's water is 88% harder than the national average of 138 PPM. It ranks #158 out of 1000 cities in our database (harder than 84% of US cities we track). Within Florida, it ranks #13 of 64 cities (10% above the state average of 236 PPM). Among mid-size cities (100k-200k), Kissimmee ranks #26 of 189 for hardness. At this hardness level, water heaters run an estimated 47% less efficiently due to scale insulation, and major water-using appliances typically last 4 years less than the national average lifespan.
What Kissimmee's Water Means for Your Home
Hardness: 259 PPM - Treatment Recommended
Kissimmee has some extremely hard water. At 259 PPM (15.1 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 259 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Kissimmee homeowners don't realize it until the plumber shows up. That's 10% harder than the Florida average.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Kissimmee's water has TTHMs at 49.3 ppb and HAA5 at 29.3 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Even though Kissimmee draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 49.3 ppb and HAA5 at 29.3 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. All levels are within legal limits, though above the stricter EWG health guidelines. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 259 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 259 PPM | < 60 PPM | No federal limit | ⚠ Very Hard |
| Total Dissolved Solids | 409 PPM | < 300 PPM | 500 PPM | ⚠ Elevated |
| PFAS (total) | 0 ppt | — | No total limit | ✓ ND |
| ↳ PFOA | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| ↳ PFOS | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| Lead | 2 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ✓ Low |
| Chlorine / Chloramine | 1.4 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | Not reported | 5 mg/L | 10 mg/L | N/A |
Our Top Picks for Kissimmee (259 PPM)
Hard water at 259 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Quick Fix for Chlorine: Shower Filter
At 1.4 mg/L chlorine, many Kissimmee residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Kissimmee
With 259 PPM hardness, a quick test strip confirms whether your specific tap matches Kissimmee's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request Toho Water Authority's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Kissimmee's Water Supply
Water Utility: Toho Water Authority
Water Source: Upper Floridan Aquifer (Groundwater)
Population Served: 110,102
Hardness: 259 PPM (15.1 grains per gallon)
Kissimmee draws its drinking water from groundwater sources — Upper Floridan Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 110,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request Toho Water Authority's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by Toho Water Authority in Kissimmee, FL, including ZIP codes:
34741, 34742, 34743, 34744, 34745, 34746, 34747, 34758, 34759, 34769, 34770, 34771, 34772
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Kissimmee
At 259 PPM (15.1 GPG), here is how to size a softener for your Kissimmee home. Multiply hardness in GPG (15.1) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 15.1 GPG × 200 gal = 3020 grains/day. Over a 7-day regeneration cycle, that is 21,140 grains - a 32,000-grain softener is the right fit for most Kissimmee households.
Compare Kissimmee to Other Florida Cities
Frequently Asked Questions About Kissimmee Water
Is Kissimmee tap water safe to drink?
Where does Kissimmee's water come from?
Do I need a water softener in Kissimmee?
Does Kissimmee water damage tankless water heaters?
How much does hard water cost a Kissimmee household per year?
What is the hardness of Kissimmee water in grains per gallon?
What size water softener do I need for Kissimmee?
Salt-based softener or salt-free conditioner for Kissimmee?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Kissimmee Homeowners Actually Buy
Common purchases for homes with 259 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Kissimmee's water data.