Is Georgetown, TX Tap Water Safe to Drink?

C
Fair1 item found

EPA data shows a health concern for Georgetown's water system. Specifically: 1 EPA health-limit violation since November 2023 (TTHM). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 260 PPM (extremely hard), which causes scale in plumbing and appliances.

City of Georgetown (EPA ID TX2460001) · Source: Surface water · System serves 191,639 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2024–Dec 2026 testing · PFAS & lithium: EPA UCMR 5, Jun 2023–Feb 2025 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for City of Georgetown

  • TTHM: Exceeded a health-based limit · Apr 2026–Jun 2026 · measured 81 ppb · limit 80 ppb · Returned to compliance

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID TX2460001. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

260
Hardness (PPM, est.)
186
TX Average
136
National Avg
3.6
Highest PFOA/PFOS (ppt)
4.81
Lead (ppb)
260 PPM Extremely Hard
CONTAMINANT LEVELS Hardness (est.) 260 PPM TDS (est.) 440 PPM PFOA/PFOS 3.6 ppt Lead 4.81 ppb Chlorine (est.) 1.1 mg/L Nitrate 0.889 mg/L
Estimated water hardness gauge for Georgetown TX showing 260 PPM Extremely HardWater quality levels in Georgetown TX compared to EPA limits - estimated hardness 260 PPM, highest PFOA/PFOS average 3.6 ppt, lead 4.81 ppb

Hardness Scale: Where Georgetown Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+
EPA health-based violation since 2023Extremely hard water (est.)

How Georgetown Compares

Georgetown's water is 91% harder than the national average of 136 PPM. It ranks #127 out of 914 cities in our database (harder than 86% of US cities we track). Within Texas, it ranks #16 of 66 cities (40% above the state average of 186 PPM). Among mid-size cities (100k-200k), Georgetown ranks #22 of 186 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.

What Georgetown's Water Means for Your Home

Hardness: 260 PPM - Treatment Recommended

Georgetown has some extremely hard water. At 260 PPM (15.2 grains per gallon), your tap is loaded with mineral content carried in from the watershed geology. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 260 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Georgetown homeowners don't realize it until the plumber shows up. That's 40% harder than the Texas average.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Georgetown's water has TTHMs at 37.1 ppb and HAA5 at 11.8 ppb — and EPA recorded a byproduct limit violation for this system since November 2023, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Georgetown's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 37.1 ppb (46% of the legal limit, but 247x the EWG guideline) and HAA5 at 11.8 ppb (20% of the legal limit, but 118x the EWG guideline). EPA recorded a byproduct violation for this system since November 2023 (see the EPA violations section), and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.203 ppb, which is 10x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. EPA recorded a byproduct violation for this system since November 2023; see the EPA violations section for dates and status.

How Hard Water Affects Your Home

At 260 PPM, untreated hard water has measurable effects on household costs and appliance life:

  • Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
  • Soap and detergent: Hard water reduces lathering, requiring significantly more product
  • Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
  • Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service

Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.

Water quality contaminant levels for Georgetown, TX
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)1.2 ppt0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)3.6 ppt0 ppt (EPA goal)4 ppt (from 2029)✓ Below
↳ Total PFAS (average of all samples)22.19 ppt—No total limitDetected
Lead (90th percentile, Dec 2026)4.81 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)✓ Low
Nitrate (EWG data)0.889 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~260 PPMNot a health issueNo federal limitVery hard
Total Dissolved Solids (estimate)~440 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1.1 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Jun 2023–Feb 2025)

Average across 22 samples: 6.9 µg/L. Highest single result: 17.4 µg/L. 7 of 22 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Our Top Picks for Georgetown (260 PPM)

Hard water at 260 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.

Quick Fix for Chlorine: Shower Filter

At 1.1 mg/L chlorine, many Georgetown residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Georgetown

With 260 PPM hardness, a quick test strip confirms whether your specific tap matches Georgetown's average before you invest in a softener. Hardness can vary within the same system.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Softener: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your softener is actually working. Test before and after.

HoneForest TDS Meter
Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. For PFAS, order a dedicated PFAS lab test.

Tap Score Lab Kit

Free option: Request Georgetown Utility Systems's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Georgetown's Water Supply

Water Utility: Georgetown Utility Systems

Water Source: Edwards Aquifer & Lake Georgetown (Surface Water)

Population Served: 191,639

Hardness: 260 PPM (15.2 grains per gallon)

Georgetown's drinking water comes from surface sources — Edwards Aquifer & Lake Georgetown. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 192,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request Georgetown Utility Systems's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Georgetown

This report is for the water system serving Georgetown, TX (Georgetown Utility Systems). ZIP codes in and near this area:

76511, 76527, 76530, 76537, 76573, 78626, 78627, 78628, 78633, 78673, 78674

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Water Softener Sizing for Georgetown

At 260 PPM (15.2 GPG), here is how to size a softener for your Georgetown home. Multiply hardness in GPG (15.2) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 15.2 GPG × 300 gal = 4,560 grains/day. Over a 7-day regeneration cycle, that is 31,920 grains - a 32,000-grain softener is the right fit for most Georgetown households.

Compare Georgetown to Other Texas Cities

Frequently Asked Questions About Georgetown Water

Is Georgetown tap water safe to drink?
EPA data shows a health concern for Georgetown's water system: 1 EPA health-limit violation since November 2023 (TTHM). A filter certified for the specific contaminant (PFAS, lead) reduces what you drink. See the EPA violations section above for dates and status.
Where does Georgetown's water come from?
Georgetown's drinking water is sourced from Edwards Aquifer & Lake Georgetown and treated by Georgetown Utility Systems. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts. Learn more about Edwards Aquifer & Lake Georgetown
Do I need a water softener in Georgetown?
Yes. At 260 PPM (15.2 GPG), Georgetown's water is extremely hard. Without a softener, expect visible scale buildup, reduced water heater efficiency, spotted dishes, and soap that doesn't lather well. A salt-based water softener is the standard solution.
Does Georgetown water damage tankless water heaters?
Yes. Most manufacturers recommend below 7-11 GPG (120-188 PPM). At 15.2 GPG, Georgetown's water exceeds this. Scale buildup in the heat exchanger reduces efficiency and can void warranties. A water softener upstream is the standard solution.
How much does hard water cost a Georgetown household per year?
At 260 PPM, hard water increases household expenses through higher water heating bills (scale buildup insulates heating elements), more soap and detergent needed, shorter appliance lifespans, and increased plumbing maintenance. A water softener reduces these costs and typically pays for itself within a few years.
What is the hardness of Georgetown water in grains per gallon?
Georgetown's water hardness is 15.2 grains per gallon (GPG), which equals 260 parts per million (PPM). Most water softener manufacturers recommend treatment above 7 GPG. To convert: 1 GPG = 17.1 PPM.
What size water softener do I need for Georgetown?
At 260 PPM (15.2 GPG), a family of four needs: 15.2 GPG x 300 gal/day x 7 days = 31,920 grains. A 32,000-grain softener fits most Georgetown homes.
Salt-based softener or salt-free conditioner for Georgetown?
At 260 PPM, a salt-based softener is the better choice. Salt-free conditioners prevent scale but don't remove minerals — you'll still have hard water spots and poor soap lathering. Read the full comparison

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Georgetown Homes

Prioritized for contaminant reduction for homes with 260 PPM water.

Affiliate disclosure: we may earn a commission. Selection based on Georgetown's water data.

On a private well? This report covers Georgetown's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Georgetown in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →