Is Deerfield Beach, FL Tap Water Safe to Drink?
EPA data shows a health concern for Deerfield Beach's water system. Specifically: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOS 9 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 260 PPM (extremely hard), which causes scale in plumbing and appliances.
EPA health violations for Deerfield Beach, City of
No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Deerfield Beach, City of since November 2023.
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID FL4060254. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Deerfield Beach Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Deerfield Beach Compares
Deerfield Beach's water is 91% harder than the national average of 136 PPM. It ranks #134 out of 914 cities in our database (harder than 85% of US cities we track). Within Florida, it ranks #9 of 60 cities (10% above the state average of 236 PPM). Among cities (50k-100k), Deerfield Beach ranks #45 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.
What Deerfield Beach's Water Means for Your Home
Hardness: 260 PPM - Treatment Recommended
Deerfield Beach has some extremely hard water. At 260 PPM (15.2 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 260 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Deerfield Beach homeowners don't realize it until the plumber shows up. That's 10% harder than the Florida average.
Contaminants & Safety
Forever chemicals (PFAS) are worth watching here. Deerfield Beach has PFOS at 9 ppt, exceeding the EPA's 2024 limit of 4 ppt per compound. PFAS are synthetic compounds that accumulate in your body over time. A certified carbon filter or reverse osmosis system certified to NSF/ANSI 53 or 58 for PFOA/PFOS is the most effective protection. See the regulatory timeline.
What's in the Treatment Process
Even though Deerfield Beach draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 17.2 ppb and HAA5 at 20.6 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. The EWG-reported levels are below the legal limits but above the stricter EWG health guidelines.
Chromium-6 is naturally present in Deerfield Beach's aquifer geology at 0.18 ppb — 9x the EWG health guideline. There's no federal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
How Hard Water Affects Your Home
At 260 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | 2.2 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| PFOS (highest entry-point avg.) | 9 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ⚠ Above |
| ↳ Total PFAS (average of all samples) | 12.8 ppt | — | No total limit | Detected |
| Lead (90th percentile, Dec 2023) | 2.9 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Nitrate (EWG data) | 0.127 mg/L | 5 mg/L (CheckMyTap flag, half the limit) | 10 mg/L | ✓ OK |
| Hardness (estimate) | ~260 PPM | Not a health issue | No federal limit | Very hard |
| Total Dissolved Solids (estimate) | ~400 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~1.8 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Jan 2024–Jul 2024)
Average across 2 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 2 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Recommendations for Deerfield Beach Homes
Our Top Picks for Deerfield Beach (260 PPM)
Hard water at 260 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Recommended Filter for Deerfield Beach
PFAS exceed EPA limits (PFOS: 9 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.
Quick Fix for Chlorine: Shower Filter
At 1.8 mg/L chlorine, many Deerfield Beach residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Deerfield Beach
With PFAS at 12.8 ppt in Deerfield Beach's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.
Free option: Request City of Deerfield Beach Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Deerfield Beach's Water Supply
Water Utility: City of Deerfield Beach Water
Water Source: Biscayne Aquifer (Groundwater)
Population Served: 62,000
Hardness: 260 PPM (15.2 grains per gallon)
Deerfield Beach draws its drinking water from groundwater sources — Biscayne Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 62,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Deerfield Beach Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Deerfield Beach
This report is for the water system serving Deerfield Beach, FL (City of Deerfield Beach Water). ZIP codes in and near this area:
33060, 33061, 33062, 33064, 33072, 33074, 33077, 33441, 33442, 33443
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Water Softener Sizing for Deerfield Beach
At 260 PPM (15.2 GPG), here is how to size a softener for your Deerfield Beach home. Multiply hardness in GPG (15.2) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 15.2 GPG × 300 gal = 4,560 grains/day. Over a 7-day regeneration cycle, that is 31,920 grains - a 32,000-grain softener is the right fit for most Deerfield Beach households.
Compare Deerfield Beach to Other Florida Cities
Frequently Asked Questions About Deerfield Beach Water
Is Deerfield Beach tap water safe to drink?
Where does Deerfield Beach's water come from?
Do I need a water softener in Deerfield Beach?
How do I remove PFAS from Deerfield Beach tap water?
What water filter is best for Deerfield Beach?
Is Deerfield Beach water safe for babies and infants?
Does Deerfield Beach water damage tankless water heaters?
Do I need both a softener AND a filter in Deerfield Beach?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.
Common Options for Deerfield Beach Homes
Prioritized for contaminant reduction for homes with 260 PPM water and PFAS above EPA limits.
Affiliate disclosure: we may earn a commission. Selection based on Deerfield Beach's water data.