Is Tacoma South, WA Tap Water Safe to Drink?

A
ExcellentNo concerns detected

Yes, Tacoma South tap water is safe to drink. Hardness is low at 20 PPM, and no contaminants exceed health guidelines. Most homes here don't need treatment.

Tacoma Water · Source: Green River Watershed · Serves 448,771 residents ·

20
Hardness (PPM)
33
WA Average
138
National Avg
8.08
PFAS (ppt)
1
Lead (ppb)
20 PPM Slightly Hard
CONTAMINANT LEVELS Hardness 20 PPM TDS 38 PPM PFAS 8.08 ppt Lead 1 ppb Chlorine 0.8 mg/L Nitrate 2.22 mg/L
Water hardness gauge for Tacoma South WA showing 20 PPM Slightly HardWater quality contaminant levels in Tacoma South WA compared to EPA limits - hardness 20 PPM, PFAS 8.08 ppt, lead 1 ppb

Hardness Scale: Where Tacoma South Falls

Soft
0
Slightly
60
Moderate
120
Hard
180
Very Hard
250
Extreme
400+

How Tacoma South Compares

Tacoma South's water is 86% softer than the national average of 138 PPM - ranking in the bottom 93% for hardness nationwide. Most homes here do not need a softener. Within Washington, it ranks #16 of 26 cities (39% below the state average of 33 PPM). Among large cities (200k-500k), Tacoma South ranks #159 of 165 for hardness.

What Tacoma South's Water Means for Your Home

Hardness: 20 PPM - Low Concern

Tacoma South's water is slightly hard at 20 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. Tacoma South is softer than 93% of US cities. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Tacoma South's water has TTHMs at 9.81 ppb and HAA5 at 3.81 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Tacoma South's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 9.81 ppb (12% of the legal limit, but 65x the EWG guideline) and HAA5 at 3.81 ppb (6% of the legal limit, but 38x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.164 ppb, which is 8.2x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.

Water quality contaminant levels for Tacoma South, WA
ContaminantDetectedHealth GuidelineLegal LimitStatus
Hardness (as CaCO₃)20 PPM< 60 PPMNo federal limit✓ OK
Total Dissolved Solids38 PPM< 300 PPM500 PPM✓ OK
PFAS (total)8.08 pptNo total limitDetected
↳ PFOA0 ppt0 ppt4 ppt (2024)✓ OK
↳ PFOS0 ppt0 ppt4 ppt (2024)✓ OK
Lead1 ppb0 ppb (no safe level)15 ppb (10 ppb in 2027)✓ Low
Chlorine / Chloramine0.8 mg/LTaste threshold ~1.04.0 mg/L✓ Normal
Nitrate2.22 mg/L5 mg/L10 mg/L✓ OK

Good news for Tacoma South residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.

How to Test Your Water in Tacoma South

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Certified Lab Kit

Mail-in sample analyzed by a certified lab. 21+ parameters including PFAS, heavy metals, and bacteria. Recommended given elevated PFAS in your area.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request Tacoma Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Tacoma South's Water Supply

Water Utility: Tacoma Water

Water Source: Green River Watershed (Surface Water)

Population Served: 448,771

Hardness: 20 PPM (1.2 grains per gallon)

Tacoma South's drinking water comes from surface sources — Green River Watershed. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 449,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request Tacoma Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes Covered by This Report

This water quality data applies to all areas served by Tacoma Water in Tacoma South, WA, including ZIP codes:

98329, 98332, 98333, 98335, 98349, 98387, 98388, 98394, 98395, 98438, 98439, 98467, 98496, 98497, 98498, 98499, 98524, 98528, 98555, 98588

If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.

Compare Tacoma South to Other Washington Cities

Frequently Asked Questions About Tacoma South Water

Is Tacoma South tap water safe to drink?
Yes, Tacoma South tap water is safe to drink. All regulated contaminants are within EPA limits. However, 11 contaminants exceed the stricter EWG health guidelines. Review the contaminant table above for details.
Where does Tacoma South's water come from?
Tacoma South's drinking water is sourced from Green River Watershed and treated by Tacoma Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Tacoma South?
At 20 PPM, Tacoma South's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Tacoma South's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Tacoma South has TTHMs at 9.81 ppb and HAA5 at 3.81 ppb — within legal limits but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Tacoma South's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.164 ppb, which is 8.2x the EWG health guideline. There's no separate federal limit for chromium-6. It can come from industrial sources or natural geology. Reverse osmosis is the most effective removal method.
Can I drink Tacoma South tap water straight from the faucet?
Tacoma South's water meets all EPA legal standards. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
How does Tacoma South compare to the Washington average?
Tacoma South's water is 39% softer than the Washington average. It ranks #16 out of 26 cities we track in the state for hardness. Nationally, Tacoma South is softer than 93% of US cities in our database.
What water filter is best for Tacoma South?
The best filter depends on which contaminants you want to address. See our softener vs. filter guide for the full breakdown.

Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.

On a private well? This report covers Tacoma South's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Get a personalized recommendation for Tacoma South in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →