Is Danville, VA Tap Water Safe to Drink?

A
ExcellentNo health concerns in EPA data

No health-based violations or limit exceedances in recent EPA data for Danville's water system. This covers EPA violation records since November 2023, the latest lead testing, and EPA's PFAS testing. Your home's own plumbing can still add lead, so a tap test is how to be sure.

Danville, City of (EPA ID VA5590100) · Source: Surface water · System serves 42,590 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2022–Dec 2024 testing · PFAS & lithium: EPA UCMR 5, Dec 2024–Sep 2025 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Danville, City of

No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Danville, City of since November 2023.

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID VA5590100. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

30
Hardness (PPM, est.)
52
VA Average
136
National Avg
2.3
Highest PFOA/PFOS (ppt)
0
Lead (ppb)
30 PPM Slightly Hard
CONTAMINANT LEVELS Hardness (est.) 30 PPM TDS (est.) 47 PPM PFOA/PFOS 2.3 ppt Lead 0 ppb Chlorine (est.) 1.7 mg/L Nitrate 0.343 mg/L
Estimated water hardness gauge for Danville VA showing 30 PPM Slightly HardWater quality levels in Danville VA compared to EPA limits - estimated hardness 30 PPM, highest PFOA/PFOS average 2.3 ppt, lead 0 ppb

Hardness Scale: Where Danville Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+

How Danville Compares

Danville's water is 78% softer than the national average of 136 PPM - ranking in the bottom 82% for hardness nationwide. Most homes here do not need a softener. Within Virginia, it ranks #14 of 20 cities (42% below the state average of 52 PPM). Among smaller cities, Danville ranks #170 of 244 for hardness.

What Danville's Water Means for Your Home

Hardness: 30 PPM - Low Concern

Danville's water is slightly hard at 30 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. Danville is softer than 82% of US cities. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Danville's water has TTHMs at 52.2 ppb and HAA5 at 30 ppb — below the legal limits in EWG's data, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Danville's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 52.2 ppb (65% of the legal limit, but 348x the EWG guideline) and HAA5 at 30 ppb (50% of the legal limit, but 300x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.234 ppb, which is 12x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

Water quality contaminant levels for Danville, VA
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)2.3 ppt0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
↳ Total PFAS (average of all samples)2.28 ppt—No total limitDetected
Lead (90th percentile, Dec 2024)0 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)✓ Low
Nitrate (EWG data)0.343 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~30 PPMNot a health issueNo federal limitOK
Total Dissolved Solids (estimate)~47 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1.7 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Dec 2024–Sep 2025)

Average across 4 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Quick Fix for Chlorine: Shower Filter

At 1.7 mg/L chlorine, many Danville residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Danville

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. For PFAS, order a dedicated PFAS lab test.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request City of Danville Utilities's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Danville's Water Supply

Water Utility: City of Danville Utilities

Water Source: Dan River (Surface Water)

Population Served: 42,590

Hardness: 30 PPM (1.8 grains per gallon)

Danville's drinking water comes from surface sources — Dan River. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 43,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Danville Utilities's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Danville

This report is for the water system serving Danville, VA (City of Danville Utilities). ZIP codes in and near this area:

23964, 23968, 24054, 24055, 24069, 24078, 24089, 24112, 24113, 24114, 24115, 24133, 24137, 24139, 24148, 24165, 24168, 24520, 24527, 24530, 24531, 24535, 24539, 24540, 24541, 24543, 24549, 24557, 24558, 24565, 24566, 24586, 24589, 24592, 24594, 24597, 24598

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Compare Danville to Other Virginia Cities

Frequently Asked Questions About Danville Water

Is Danville tap water safe to drink?
No EPA health-limit violations for Danville's water system since November 2023. Lead was 0 ppb (90th percentile) and PFOA/PFOS were below EPA's 4 ppt standard. This describes the water system; your home's plumbing can still add lead, so a tap test is how to be sure. Separately, 13 contaminants exceed the stricter health guidelines published by the Environmental Working Group (EWG), which are not legal limits.
Where does Danville's water come from?
Danville's drinking water is sourced from Dan River and treated by City of Danville Utilities. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Danville?
At 30 PPM, Danville's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Danville's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Danville has TTHMs at 52.2 ppb and HAA5 at 30 ppb (EWG Tap Water Database) — below the legal limits in EWG's data, but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Danville's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.234 ppb, which is 12x the EWG health guideline. There's no separate federal limit for chromium-6. It can come from industrial sources or natural geology. Reverse osmosis is the most effective removal method.
Why does Danville water taste like chlorine?
Danville's water contains 1.7 mg/L of chlorine. Chlorine is essential for safety but creates the "pool water" taste. Easiest fix: an activated carbon filter. For skin and hair in the shower, a shower filter ($30-$40) installs in minutes.
Can I drink Danville tap water straight from the faucet?
Danville's water system has no EPA health-limit violations since November 2023. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
How does Danville compare to the Virginia average?
Danville's water is 42% softer than the Virginia average. It ranks #14 out of 20 cities we track in the state for hardness. Nationally, Danville is softer than 82% of US cities in our database.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Danville Homes

Common purchases for homes with 30 PPM water.

Affiliate disclosure: we may earn a commission. Selection based on Danville's water data.

On a private well? This report covers Danville's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Danville in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →