St. George vs Layton Water Quality
Side-by-side water quality comparison for two Utah cities.
If you are comparing St. George and Layton water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
St. George has somewhat harder water at 266 PPM versus Layton at 265 PPM, a difference of 1 PPM. At 266 PPM, St. George residents should budget for a water softener ($600-$1,500 installed). Without one, expect scale buildup on fixtures, reduced water heater efficiency, extra soap and detergent use, and shorter appliance lifespans. Layton also has hard water but to a lesser degree.
Both cities have hard water, but St. George's higher hardness means more aggressive scale buildup and higher household impact.
Water sources and why they differ
Water sources differ: St. George draws from Quail Creek Reservoir, Sand Hollow, while Layton uses Weber Basin, Davis County wells. Both use similar source types, but local geology creates the hardness variation.
What this means for you
If you are moving from Layton to St. George, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | St. George | Layton |
|---|---|---|
| Hardness | 266 PPM | 265 PPM |
| GPG | 15.6 | 15.5 |
| TDS | 447 PPM | 355 PPM |
| Highest PFOA/PFOS | Not detected (reporting limit 4 ppt) | Not detected (reporting limit 4 ppt) |
| Lead | 1.4 ppb | 4.08 ppb |
| Chlorine | 1.1 mg/L | 0.9 mg/L |
| Level | Extremely Hard | Extremely Hard |