Is Pflugerville, TX Tap Water Safe to Drink?

C
Fair2 concerns found

Pflugerville tap water is legally compliant, but one contaminant exceeds health guidelines. Specifically: PFAS above EPA limits (PFOA: 6.2 ppt, PFOS: 12 ppt — limit is 4 ppt each). A point-of-use filter is recommended for drinking and cooking water. Pflugerville also has very hard water at 190 PPM.

City of Pflugerville Water · Source: Lake Travis & groundwater · Serves 63,464 residents ·

190
Hardness (PPM)
189
TX Average
138
National Avg
85.39
PFAS (ppt)
1.1
Lead (ppb)
190 PPM Very Hard
CONTAMINANT LEVELS Hardness 190 PPM TDS 319 PPM PFAS 85.39 ppt Lead 1.1 ppb Chlorine 1.6 mg/L Nitrate 0.668 mg/L
Water hardness gauge for Pflugerville TX showing 190 PPM Very HardWater quality contaminant levels in Pflugerville TX compared to EPA limits - hardness 190 PPM, PFAS 85.39 ppt, lead 1.1 ppb

Hardness Scale: Where Pflugerville Falls

Soft
0
Slightly
60
Moderate
120
Hard
180
Very Hard
250
Extreme
400+
PFAS above EPA limitsVery hard water

How Pflugerville Compares

Pflugerville's water is 38% harder than the national average of 138 PPM. It ranks #347 out of 1000 cities in our database (harder than 65% of US cities we track). Within Texas, it ranks #34 of 76 cities (1% above the state average of 189 PPM). Among cities (50k-100k), Pflugerville ranks #108 of 258 for hardness. At this hardness level, water heaters run an estimated 35% less efficiently due to scale insulation, and major water-using appliances typically last 3 years less than the national average lifespan.

What Pflugerville's Water Means for Your Home

Hardness: 190 PPM - Treatment Recommended

Pflugerville has some seriously hard water. At 190 PPM (11.1 grains per gallon), your tap is loaded with mineral content carried in from the watershed geology. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 190 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Pflugerville homeowners don't realize it until the plumber shows up. That's 1% harder than the Texas average.

Contaminants & Safety

Forever chemicals (PFAS) are a serious concern here. Pflugerville has PFOA at 6.2 ppt and PFOS at 12 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF P473 certification — that's the standard that specifically tests for PFAS removal.

What's in the Treatment Process

Pflugerville's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 44.7 ppb (56% of the legal limit, but 298x the EWG guideline) and HAA5 at 10.1 ppb (17% of the legal limit, but 101x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.

How Hard Water Affects Your Home

At 190 PPM, untreated hard water has measurable effects on household costs and appliance life:

  • Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
  • Soap and detergent: Hard water reduces lathering, requiring significantly more product
  • Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
  • Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service

Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.

Water quality contaminant levels for Pflugerville, TX
ContaminantDetectedHealth GuidelineLegal LimitStatus
Hardness (as CaCO₃)190 PPM< 60 PPMNo federal limit⚠ Very Hard
Total Dissolved Solids319 PPM< 300 PPM500 PPM⚠ Elevated
PFAS (total)85.39 pptNo total limitDetected
↳ PFOA6.2 ppt0 ppt4 ppt (2024)⚠ Exceeds
↳ PFOS12 ppt0 ppt4 ppt (2024)⚠ Exceeds
Lead1.1 ppb0 ppb (no safe level)15 ppb (10 ppb in 2027)✓ Low
Chlorine / Chloramine1.6 mg/LTaste threshold ~1.04.0 mg/L✓ Normal
Nitrate0.668 mg/L5 mg/L10 mg/L✓ OK

Our Top Picks for Pflugerville (190 PPM)

Hard water at 190 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.

Recommended Filter for Pflugerville

PFAS exceed EPA limits (PFOA: 6.2 ppt, PFOS: 12 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.

Quick Fix for Chlorine: Shower Filter

At 1.6 mg/L chlorine, many Pflugerville residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Pflugerville

With PFAS at 85.39 ppt in Pflugerville's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.

Most Accurate: Certified Lab Kit

Mail-in sample analyzed by a certified lab. 21+ parameters including PFAS, heavy metals, and bacteria. Recommended given elevated PFAS in your area.

Tap Score Lab Kit
Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Softener: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your softener is actually working. Test before and after.

HoneForest TDS Meter

Free option: Request City of Pflugerville Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Pflugerville's Water Supply

Water Utility: City of Pflugerville Water

Water Source: Lake Travis & groundwater (Surface Water)

Population Served: 63,464

Hardness: 190 PPM (11.1 grains per gallon)

Pflugerville's drinking water comes from surface sources — Lake Travis & groundwater. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 63,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Pflugerville Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes Covered by This Report

This water quality data applies to all areas served by City of Pflugerville Water in Pflugerville, TX, including ZIP codes:

76574, 78660, 78691

If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.

Water Softener Sizing for Pflugerville

At 190 PPM (11.1 GPG), here is how to size a softener for your Pflugerville home. Multiply hardness in GPG (11.1) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 11.1 GPG × 200 gal = 2220 grains/day. Over a 7-day regeneration cycle, that is 15,540 grains - a 32,000-grain softener is the right fit for most Pflugerville households.

Compare Pflugerville to Other Texas Cities

Frequently Asked Questions About Pflugerville Water

Is Pflugerville tap water safe to drink?
Pflugerville tap water is legally compliant, but one contaminant exceeds health guidelines. Forever chemicals (PFAS) at 85.39 ppt exceed the EPA limit of 4 ppt. A filter certified to NSF P473 removes them effectively. Review the contaminant table above for specific numbers.
Where does Pflugerville's water come from?
Pflugerville's drinking water is sourced from Lake Travis & groundwater and treated by City of Pflugerville Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Pflugerville?
Yes. At 190 PPM (11.1 GPG), Pflugerville's water is very hard. Without a softener, expect visible scale buildup, reduced water heater efficiency, spotted dishes, and soap that doesn't lather well. A salt-based water softener is the standard solution.
How do I remove PFAS from Pflugerville tap water?
Pflugerville has PFAS above EPA limits (PFOA: 6.2 ppt, PFOS: 12 ppt — limit is 4 ppt each). Reverse osmosis and granular activated carbon both reduce PFAS by 95-99%. For most homes, a point-of-use RO system under the kitchen sink is most practical. Look for NSF P473 certification. Standard pitcher filters do not adequately reduce PFAS.
What water filter is best for Pflugerville?
The best filter depends on which contaminants you want to address. For PFAS, look for NSF P473 certification. Granular activated carbon and reverse osmosis are both effective. For chlorine taste and odor, an activated carbon filter is effective and affordable. See our softener vs. filter guide for the full breakdown.
Is Pflugerville water safe for babies and infants?
Caution is warranted for Pflugerville water and infant formula. Concerns: PFAS above EPA limits (PFOA: 6.2 ppt, PFOS: 12 ppt). Use filtered water (reverse osmosis or NSF-certified) or bottled water for formula preparation.
Does Pflugerville water damage tankless water heaters?
Yes. Most manufacturers recommend below 7-11 GPG (120-188 PPM). At 11.1 GPG, Pflugerville's water exceeds this. Scale buildup in the heat exchanger reduces efficiency and can void warranties. A water softener upstream is the standard solution.
Do I need both a softener AND a filter in Pflugerville?
In Pflugerville, yes — they solve different problems. A softener removes hardness minerals (190 PPM) that cause scale and soap scum. A filter removes contaminants like PFAS (85.39 ppt). Install the softener first (whole-house), then a point-of-use filter at the kitchen sink for drinking water.

Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.

What Pflugerville Homeowners Actually Buy

Prioritized for contaminant reduction for homes with 190 PPM water and PFAS above EPA limits.

Affiliate disclosure: we may earn a commission. Selection based on Pflugerville's water data.

On a private well? This report covers Pflugerville's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Get a personalized recommendation for Pflugerville in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →