Is Garland, TX Tap Water Safe to Drink?
Yes, Garland tap water is safe to drink. No contaminants exceed health guidelines. However, Garland has hard water at 120 PPM, which will cause scale buildup in plumbing and appliances over time. A softener or conditioner is worth considering.
Hardness Scale: Where Garland Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Garland Compares
Garland's water is close to the national average of 138 PPM, ranking #523 out of 1000 cities tracked. Within Texas, it ranks #61 of 76 cities (37% below the state average of 189 PPM). Among large cities (200k-500k), Garland ranks #83 of 165 for hardness. At this hardness level, water heaters run an estimated 22% less efficiently due to scale insulation, and major water-using appliances typically last 2 years less than the national average lifespan.
What Garland's Water Means for Your Home
Hardness: 120 PPM - Treatment Recommended
Garland's water is hard at 120 PPM (7 GPG). That's enough to notice every day: gradual scale on fixtures, spots on dishes, soap that doesn't lather the way it should. That's 37% softer than the Texas average. Homeowners who install a water softener or salt-free conditioner notice the difference fast: better lathering, cleaner dishes, and appliances that last longer. That adds up. Hard water at 120 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Garland homeowners don't realize it until the plumber shows up.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Garland's water has TTHMs at 36.5 ppb and HAA5 at 22.2 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Garland's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 36.5 ppb (46% of the legal limit, but 243x the EWG guideline) and HAA5 at 22.2 ppb (37% of the legal limit, but 222x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 0.0893 ppb, which is 4.5x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 120 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 120 PPM | < 60 PPM | No federal limit | ✓ OK |
| Total Dissolved Solids | 238 PPM | < 300 PPM | 500 PPM | ✓ OK |
| PFAS (total) | 24.12 ppt | — | No total limit | Detected |
| ↳ PFOA | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| ↳ PFOS | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| Lead | 1.2 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ✓ Low |
| Chlorine / Chloramine | 1.7 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | 0.41 mg/L | 5 mg/L | 10 mg/L | ✓ OK |
Recommendations for Garland Homes
Our Top Picks for Garland (120 PPM)
Hard water at 120 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Quick Fix for Chlorine: Shower Filter
At 1.7 mg/L chlorine, many Garland residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Garland
With 120 PPM hardness, a quick test strip confirms whether your specific tap matches Garland's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request City of Garland's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Garland's Water Supply
Water Utility: City of Garland
Water Source: North Texas MWD (Surface Water)
Population Served: 248,822
Hardness: 120 PPM (7 grains per gallon)
Garland's drinking water comes from surface sources — North Texas MWD. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 249,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Garland's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by City of Garland in Garland, TX, including ZIP codes:
75030, 75040, 75041, 75042, 75043, 75044, 75045, 75046, 75047, 75048, 75049, 75081, 75088, 75089, 75149, 75150, 75181, 75182, 75185
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Garland
At 120 PPM (7 GPG), here is how to size a softener for your Garland home. Multiply hardness in GPG (7) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 7 GPG × 200 gal = 1400 grains/day. Over a 7-day regeneration cycle, that is 9,800 grains - a 32,000-grain softener is the right fit for most Garland households.
Compare Garland to Other Texas Cities
Frequently Asked Questions About Garland Water
Is Garland tap water safe to drink?
Where does Garland's water come from?
Do I need a water softener in Garland?
Does Garland water damage tankless water heaters?
How much does hard water cost a Garland household per year?
What is the hardness of Garland water in grains per gallon?
What size water softener do I need for Garland?
Salt-based softener or salt-free conditioner for Garland?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Garland Homeowners Actually Buy
Common purchases for homes with 120 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Garland's water data.