Is Aberdeen, SD Tap Water Safe to Drink?
No EPA health-limit violations for Aberdeen's water system since November 2023, with one item to watch. Worth watching: 5 treatment-technique violations since November 2023. Water hardness is estimated at 204 PPM (very hard), which causes scale in plumbing and appliances.
EPA health violations for Aberdeen
- Interim Enhanced Surface Water Treatment Rule: Required treatment step not met · Feb 2026–Feb 2026 · Returned to compliance
- Interim Enhanced Surface Water Treatment Rule: Required treatment step not met · May 2025–May 2025 · Returned to compliance
- Interim Enhanced Surface Water Treatment Rule: Required treatment step not met · Dec 2024–Dec 2024 · Returned to compliance
- Interim Enhanced Surface Water Treatment Rule: Required treatment step not met · Dec 2024–Dec 2024 · Returned to compliance
- Interim Enhanced Surface Water Treatment Rule: Required treatment step not met · Nov 2024–Nov 2024 · Returned to compliance
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID SD4600020. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Aberdeen Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Aberdeen Compares
Aberdeen's water is 50% harder than the national average of 136 PPM. It ranks #265 out of 914 cities in our database (harder than 71% of US cities we track). Within South Dakota, it ranks #6 of 6 cities (16% below the state average of 243 PPM). Among smaller cities, Aberdeen ranks #55 of 244 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.
What Aberdeen's Water Means for Your Home
Hardness: 204 PPM - Treatment Recommended
Aberdeen has some seriously hard water. At 204 PPM (11.9 grains per gallon), your tap is loaded with mineral content carried in from the watershed geology. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 204 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Aberdeen homeowners don't realize it until the plumber shows up. That's 16% softer than the South Dakota average.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Aberdeen's water has TTHMs at 12.1 ppb and HAA5 at 16.4 ppb — below the legal limits in EWG's data, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Aberdeen's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 12.1 ppb (15% of the legal limit, but 81x the EWG guideline) and HAA5 at 16.4 ppb (27% of the legal limit, but 164x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 0.607 ppb, which is 30x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
How Hard Water Affects Your Home
At 204 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| PFOS (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| ↳ Total PFAS (average of all samples) | 5.53 ppt | — | No total limit | Detected |
| Lead (90th percentile, Jun 2025) | 3 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Hardness (estimate) | ~204 PPM | Not a health issue | No federal limit | Very hard |
| Total Dissolved Solids (estimate) | ~329 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~0.8 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Jan 2023–Oct 2023)
Average across 4 samples: 82.25 µg/L. Highest single result: 100 µg/L. 4 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Our Top Picks for Aberdeen (204 PPM)
Hard water at 204 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
How to Test Your Water in Aberdeen
With 204 PPM hardness, a quick test strip confirms whether your specific tap matches Aberdeen's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request City of Aberdeen Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Aberdeen's Water Supply
Water Utility: City of Aberdeen Water
Water Source: Elm River aquifer (Surface Water)
Population Served: 27,989
Hardness: 204 PPM (11.9 grains per gallon)
Aberdeen's drinking water comes from surface sources — Elm River aquifer. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 28,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Aberdeen Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Aberdeen
This report is for the water system serving Aberdeen, SD (City of Aberdeen Water). ZIP codes in and near this area:
57219, 57261, 57270, 57345, 57348, 57362, 57371, 57373, 57401, 57402, 57420, 57421, 57422, 57424, 57426, 57427, 57428, 57429, 57430, 57432, 57433, 57434, 57435, 57437, 57438, 57439, 57440, 57441, 57442, 57445, 57446, 57448, 57449, 57450, 57451, 57452, 57454, 57455, 57456, 57457, 57460, 57461, 57465, 57466, 57467, 57468, 57469, 57470, 57471, 57472, 57473, 57474, 57475, 57476, 57477, 57479, 57481, 57501, 57520, 57522, 57532, 57536, 57540, 57564, 57631, 57646, 57652
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Water Softener Sizing for Aberdeen
At 204 PPM (11.9 GPG), here is how to size a softener for your Aberdeen home. Multiply hardness in GPG (11.9) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 11.9 GPG × 300 gal = 3,570 grains/day. Over a 7-day regeneration cycle, that is 24,990 grains - a 32,000-grain softener is the right fit for most Aberdeen households.
Compare Aberdeen to Other South Dakota Cities
Frequently Asked Questions About Aberdeen Water
Is Aberdeen tap water safe to drink?
Where does Aberdeen's water come from?
Do I need a water softener in Aberdeen?
Does Aberdeen water damage tankless water heaters?
How much does hard water cost a Aberdeen household per year?
What is the hardness of Aberdeen water in grains per gallon?
What size water softener do I need for Aberdeen?
Salt-based softener or salt-free conditioner for Aberdeen?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.
Common Options for Aberdeen Homes
Common purchases for homes with 204 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Aberdeen's water data.