Philadelphia vs Hanover Water Quality
Side-by-side water quality comparison for two Pennsylvania cities.
If you are comparing Philadelphia and Hanover water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Philadelphia has somewhat harder water at 171 PPM versus Hanover at 170 PPM, a difference of 1 PPM. At 171 PPM, Philadelphia residents will notice spotting and reduced soap efficiency. A softener is recommended for long-term appliance protection. Hanover also has hard water but to a lesser degree.
Both cities have hard water, but Philadelphia's higher hardness means more aggressive scale buildup and higher household impact.
Water sources and why they differ
Water sources differ: Philadelphia draws from Delaware + Schuylkill Rivers, while Hanover uses Groundwater. The mix of groundwater and surface water explains much of the hardness difference.
Contaminant concerns
PFAS contamination is a concern in Philadelphia (PFOA at 7.4 ppt and PFOS at 5.1 ppt, above the EPA limit of 4 ppt each). A reverse osmosis system or a filter certified to NSF/ANSI 53 for PFOA/PFOS is recommended for drinking water.
What this means for you
If you are moving from Hanover to Philadelphia, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Philadelphia | Hanover |
|---|---|---|
| Hardness | 171 PPM | 170 PPM |
| GPG | 10 | 9.9 |
| TDS | 471 PPM | 280 PPM |
| Highest PFOA/PFOS | 7.4 ppt | Not detected (reporting limit 4 ppt) |
| Lead | 2 ppb | 2 ppb |
| Chlorine | 1.5 mg/L | 1.2 mg/L |
| Level | Hard | Hard |