Is Canby, OR Tap Water Safe to Drink?
No health-based violations or limit exceedances in recent EPA data for Canby's water system. This covers EPA violation records since November 2023, the latest lead testing, and EPA's PFAS testing. Your home's own plumbing can still add lead, so a tap test is how to be sure.
EPA health violations for Canby Utility
No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Canby Utility since November 2023.
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID OR4100157. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Canby Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Canby Compares
Canby's water is 84% softer than the national average of 136 PPM - ranking in the bottom 91% for hardness nationwide. Most homes here do not need a softener. Within Oregon, it ranks #27 of 48 cities (8% below the state average of 24 PPM). Among smaller cities, Canby ranks #207 of 244 for hardness.
What Canby's Water Means for Your Home
Hardness: 22 PPM - Low Concern
Canby's water is slightly hard at 22 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. Canby is softer than 91% of US cities. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Canby's water has TTHMs at 18.9 ppb and HAA5 at 10.2 ppb — below the legal limits in EWG's data, and the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Canby's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 18.9 ppb (24% of the legal limit, but 126x the EWG guideline) and HAA5 at 10.2 ppb (17% of the legal limit, but 102x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 0.0666 ppb, which is 3.3x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| PFOS (highest entry-point avg.) | ND (< 4 ppt) | 0 ppt (EPA goal) | 4 ppt (from 2029) | ✓ Below |
| ↳ Total PFAS (average of all samples) | None detected (EPA reporting limits 3–20 ppt) | — | No total limit | Not detected |
| Lead (90th percentile, Dec 2024) | 2.1 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Nitrate (EWG data) | 0.753 mg/L | 5 mg/L (CheckMyTap flag, half the limit) | 10 mg/L | ✓ OK |
| Hardness (estimate) | ~22 PPM | Not a health issue | No federal limit | OK |
| Total Dissolved Solids (estimate) | ~30 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~0.8 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Sep 2023–Apr 2024)
Average across 4 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Good news for Canby residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.
How to Test Your Water in Canby
City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.
Free option: Request Canby Utility Board's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Canby's Water Supply
Water Utility: Canby Utility Board
Water Source: Molalla River (Surface Water)
Population Served: 18,754
Hardness: 22 PPM (1.3 grains per gallon)
Canby's drinking water comes from surface sources — Molalla River. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 19,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request Canby Utility Board's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Canby
This report is for the water system serving Canby, OR (Canby Utility Board). ZIP codes in and near this area:
97013, 97017, 97038, 97042
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Compare Canby to Other Oregon Cities
Frequently Asked Questions About Canby Water
Is Canby tap water safe to drink?
Where does Canby's water come from?
Do I need a water softener in Canby?
What are disinfection byproducts in Canby's water?
Is chromium-6 in Canby's water?
Can I drink Canby tap water straight from the faucet?
What water filter is best for Canby?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.