Is Kannapolis, NC Tap Water Safe to Drink?

D
Poor2 items found

EPA data shows 2 health concerns for Kannapolis's water system. Specifically: 1 EPA health-limit violation since November 2023 (Revised Total Coliform Rule); PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOS 4.7 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it.

Kannapolis, City of (EPA ID NC0180065) · Source: Surface water · System serves 56,050 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2023–Dec 2025 testing · PFAS & lithium: EPA UCMR 5, Mar 2024–Dec 2024 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Kannapolis, City of

  • Revised Total Coliform Rule: Exceeded a health-based limit · Apr 2026–Apr 2026 · Returned to compliance

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID NC0180065. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

41
Hardness (PPM, est.)
39
NC Average
136
National Avg
4.7
Highest PFOA/PFOS (ppt)
0
Lead (ppb)
41 PPM Slightly Hard
CONTAMINANT LEVELS Hardness (est.) 41 PPM TDS (est.) 66 PPM PFOA/PFOS 4.7 ppt Lead 0 ppb Chlorine (est.) 0.8 mg/L
Estimated water hardness gauge for Kannapolis NC showing 41 PPM Slightly HardWater quality levels in Kannapolis NC compared to EPA limits - estimated hardness 41 PPM, highest PFOA/PFOS average 4.7 ppt, lead 0 ppb

Hardness Scale: Where Kannapolis Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+
EPA health-based violation since 2023PFOA/PFOS above EPA 2029 limit

How Kannapolis Compares

Kannapolis's water is 70% softer than the national average of 136 PPM - ranking in the bottom 75% for hardness nationwide. Most homes here do not need a softener. Within North Carolina, it ranks #9 of 22 cities (5% above the state average of 39 PPM). Among cities (50k-100k), Kannapolis ranks #207 of 260 for hardness.

What Kannapolis's Water Means for Your Home

Hardness: 41 PPM - Low Concern

Kannapolis's water is slightly hard at 41 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Forever chemicals (PFAS) are worth watching here. Kannapolis has PFOS at 4.7 ppt, exceeding the EPA's 2024 limit of 4 ppt per compound. PFAS are synthetic compounds that accumulate in your body over time. A certified carbon filter or reverse osmosis system certified to NSF/ANSI 53 or 58 for PFOA/PFOS is the most effective protection. See the regulatory timeline.

What's in the Treatment Process

Kannapolis's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 41.7 ppb (52% of the legal limit, but 278x the EWG guideline) and HAA5 at 37.2 ppb (62% of the legal limit, but 372x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.0669 ppb, which is 3.3x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

Water quality contaminant levels for Kannapolis, NC
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)4.7 ppt0 ppt (EPA goal)4 ppt (from 2029)⚠ Above
↳ Total PFAS (average of all samples)2.03 ppt—No total limitDetected
Lead (90th percentile, Dec 2025)0 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)✓ Low
Hardness (estimate)~41 PPMNot a health issueNo federal limitOK
Total Dissolved Solids (estimate)~66 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~0.8 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Mar 2024–Dec 2024)

Average across 8 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 8 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Recommended Filter for Kannapolis

PFAS exceed EPA limits (PFOS: 4.7 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.

How to Test Your Water in Kannapolis

With PFAS at 2.03 ppt in Kannapolis's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.

Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. For PFAS, order a dedicated PFAS lab test.

Tap Score Lab Kit
Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request City of Kannapolis Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Kannapolis's Water Supply

Water Utility: City of Kannapolis Water

Water Source: Second Creek watershed (Surface Water)

Population Served: 56,050

Hardness: 41 PPM (2.4 grains per gallon)

Kannapolis's drinking water comes from surface sources — Second Creek watershed. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 56,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Kannapolis Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Kannapolis

This report is for the water system serving Kannapolis, NC (City of Kannapolis Water). ZIP codes in and near this area:

27014, 27299, 27351, 28023, 28039, 28041, 28072, 28081, 28082, 28083, 28088, 28138, 28144, 28145, 28146, 28147, 28159

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Compare Kannapolis to Other North Carolina Cities

Frequently Asked Questions About Kannapolis Water

Is Kannapolis tap water safe to drink?
EPA data shows 2 health concerns for Kannapolis's water system: 1 EPA health-limit violation since November 2023 (Revised Total Coliform Rule); PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOS 4.7 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A filter certified for the specific contaminant (PFAS, lead) reduces what you drink. See the EPA violations section above for dates and status.
Where does Kannapolis's water come from?
Kannapolis's drinking water is sourced from Second Creek watershed and treated by City of Kannapolis Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Kannapolis?
At 41 PPM, Kannapolis's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
How do I remove PFAS from Kannapolis tap water?
Kannapolis has PFAS above EPA limits (PFOS: 4.7 ppt — limit is 4 ppt each). Reverse osmosis and granular activated carbon both reduce PFAS by 95-99%. For most homes, a point-of-use RO system under the kitchen sink is most practical. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Standard pitcher filters do not adequately reduce PFAS.
What water filter is best for Kannapolis?
The best filter depends on which contaminants you want to address. For PFAS, look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Granular activated carbon and reverse osmosis are both effective. See our softener vs. filter guide for the full breakdown.
Is Kannapolis water safe for babies and infants?
Caution is warranted for Kannapolis water and infant formula. Concerns: PFAS above EPA limits (PFOS: 4.7 ppt). Use filtered water (reverse osmosis or NSF-certified) or bottled water for formula preparation.
What are disinfection byproducts in Kannapolis's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Kannapolis has TTHMs at 41.7 ppb and HAA5 at 37.2 ppb (EWG Tap Water Database) — below the legal limits in EWG's data, but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Kannapolis's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.0669 ppb, which is 3.3x the EWG health guideline. There's no separate federal limit for chromium-6. It can come from industrial sources or natural geology. Reverse osmosis is the most effective removal method.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Kannapolis Homes

Prioritized for contaminant reduction for homes with 41 PPM water and PFAS above EPA limits.

Affiliate disclosure: we may earn a commission. Selection based on Kannapolis's water data.

On a private well? This report covers Kannapolis's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Kannapolis in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →