Is Apex, NC Tap Water Safe to Drink?

A
ExcellentNo concerns detected

Yes, Apex tap water is safe to drink. Hardness is low at 40 PPM, and no contaminants exceed health guidelines. Most homes here don't need treatment.

Town of Apex Water · Source: Jordan Lake · Serves 82,029 residents ·

40
Hardness (PPM)
41
NC Average
138
National Avg
22.01
PFAS (ppt)
1
Lead (ppb)
40 PPM Slightly Hard
CONTAMINANT LEVELS Hardness 40 PPM TDS 52 PPM PFAS 22.01 ppt Lead 1 ppb Chlorine 0.9 mg/L
Water hardness gauge for Apex NC showing 40 PPM Slightly HardWater quality contaminant levels in Apex NC compared to EPA limits - hardness 40 PPM, PFAS 22.01 ppt, lead 1 ppb

Hardness Scale: Where Apex Falls

Soft
0
Slightly
60
Moderate
120
Hard
180
Very Hard
250
Extreme
400+

How Apex Compares

Apex's water is 71% softer than the national average of 138 PPM - ranking in the bottom 75% for hardness nationwide. Most homes here do not need a softener. Within North Carolina, it ranks #14 of 25 cities (2% below the state average of 41 PPM). Among cities (50k-100k), Apex ranks #210 of 258 for hardness.

What Apex's Water Means for Your Home

Hardness: 40 PPM - Low Concern

Apex's water is slightly hard at 40 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Apex's water has TTHMs at 35.5 ppb and HAA5 at 15.2 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Apex's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 35.5 ppb (44% of the legal limit, but 237x the EWG guideline) and HAA5 at 15.2 ppb (25% of the legal limit, but 152x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.

Water quality contaminant levels for Apex, NC
ContaminantDetectedHealth GuidelineLegal LimitStatus
Hardness (as CaCO₃)40 PPM< 60 PPMNo federal limit✓ OK
Total Dissolved Solids52 PPM< 300 PPM500 PPM✓ OK
PFAS (total)22.01 pptNo total limitDetected
↳ PFOA0 ppt0 ppt4 ppt (2024)✓ OK
↳ PFOS0 ppt0 ppt4 ppt (2024)✓ OK
Lead1 ppb0 ppb (no safe level)15 ppb (10 ppb in 2027)✓ Low
Chlorine / Chloramine0.9 mg/LTaste threshold ~1.04.0 mg/L✓ Normal
NitrateNot reported5 mg/L10 mg/LN/A

Good news for Apex residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.

How to Test Your Water in Apex

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Certified Lab Kit

Mail-in sample analyzed by a certified lab. 21+ parameters including PFAS, heavy metals, and bacteria. Recommended given elevated PFAS in your area.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request Town of Apex Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Apex's Water Supply

Water Utility: Town of Apex Water

Water Source: Jordan Lake (Surface Water)

Population Served: 82,029

Hardness: 40 PPM (2.3 grains per gallon)

Apex's drinking water comes from surface sources — Jordan Lake. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 82,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request Town of Apex Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes Covered by This Report

This water quality data applies to all areas served by Town of Apex Water in Apex, NC, including ZIP codes:

27237, 27256, 27330, 27331, 27332, 27502, 27505, 27523, 27526, 27539, 27540, 27543, 27552, 27559, 27562

If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.

Compare Apex to Other North Carolina Cities

Frequently Asked Questions About Apex Water

Is Apex tap water safe to drink?
Yes, Apex tap water is safe to drink. All regulated contaminants are within EPA limits. However, 14 contaminants exceed the stricter EWG health guidelines. Review the contaminant table above for details.
Where does Apex's water come from?
Apex's drinking water is sourced from Jordan Lake and treated by Town of Apex Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts.
Do I need a water softener in Apex?
At 40 PPM, Apex's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Apex's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Apex has TTHMs at 35.5 ppb and HAA5 at 15.2 ppb — within legal limits but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Can I drink Apex tap water straight from the faucet?
Apex's water meets all EPA legal standards. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
What water filter is best for Apex?
The best filter depends on which contaminants you want to address. See our softener vs. filter guide for the full breakdown.

Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.

On a private well? This report covers Apex's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Get a personalized recommendation for Apex in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →