Howell vs Auburn Hills Water Quality
Side-by-side water quality comparison for two Michigan cities.
If you are comparing Howell and Auburn Hills water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Howell has significantly harder water at 350 PPM versus Auburn Hills at 280 PPM, a difference of 70 PPM. At 350 PPM, Howell residents should budget for a water softener ($600-$1,500 installed). Without one, expect scale buildup on fixtures, reduced water heater efficiency, extra soap and detergent use, and shorter appliance lifespans. Auburn Hills also has hard water but to a lesser degree.
Both cities have hard water, but Howell's higher hardness means more aggressive scale buildup and higher household impact.
Water sources and why they differ
Water sources differ: Howell draws from Local wells, while Auburn Hills uses Detroit Water (Lake Huron). Both use similar source types, but local geology creates the hardness variation.
What this means for you
If you are moving from Auburn Hills to Howell, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Howell | Auburn Hills |
|---|---|---|
| Hardness | 350 PPM | 280 PPM |
| GPG | 20.5 | 16.4 |
| TDS | 525 PPM | 430 PPM |
| Highest PFOA/PFOS | Not detected (reporting limit 4 ppt) | Not detected (reporting limit 4 ppt) |
| Lead | 0 ppb | 0 ppb |
| Chlorine | 1.1 mg/L | 1.2 mg/L |
| Level | Extremely Hard | Extremely Hard |