Is Farmington Hills, MI Tap Water Safe to Drink?
Yes, Farmington Hills tap water is safe to drink. No contaminants exceed health guidelines. However, Farmington Hills has hard water at 152 PPM, which will cause scale buildup in plumbing and appliances over time. A softener or conditioner is worth considering.
Hardness Scale: Where Farmington Hills Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Farmington Hills Compares
Farmington Hills's water is 10% harder than the national average of 138 PPM. It ranks #447 out of 1000 cities in our database (harder than 55% of US cities we track). Within Michigan, it ranks #18 of 26 cities (15% below the state average of 179 PPM). Among cities (50k-100k), Farmington Hills ranks #132 of 258 for hardness. At this hardness level, water heaters run an estimated 28% less efficiently due to scale insulation, and major water-using appliances typically last 2 years less than the national average lifespan.
What Farmington Hills's Water Means for Your Home
Hardness: 152 PPM - Treatment Recommended
Farmington Hills's water is hard at 152 PPM (8.9 GPG). That's enough to notice every day: gradual scale on fixtures, spots on dishes, soap that doesn't lather the way it should. That's 15% softer than the Michigan average. Homeowners who install a water softener or salt-free conditioner notice the difference fast: better lathering, cleaner dishes, and appliances that last longer. That adds up. Hard water at 152 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Farmington Hills homeowners don't realize it until the plumber shows up.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Farmington Hills's water has TTHMs at 29 ppb and HAA5 at 19.9 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Farmington Hills's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 29 ppb (36% of the legal limit, but 193x the EWG guideline) and HAA5 at 19.9 ppb (33% of the legal limit, but 199x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 0.131 ppb, which is 6.6x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 152 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 152 PPM | < 60 PPM | No federal limit | ⚠ Hard |
| Total Dissolved Solids | 233 PPM | < 300 PPM | 500 PPM | ✓ OK |
| PFAS (total) | 0 ppt | — | No total limit | ✓ ND |
| ↳ PFOA | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| ↳ PFOS | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| Lead | 0.9 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ✓ Low |
| Chlorine / Chloramine | 0.6 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | 0.457 mg/L | 5 mg/L | 10 mg/L | ✓ OK |
Recommendations for Farmington Hills Homes
Our Top Picks for Farmington Hills (152 PPM)
Hard water at 152 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
How to Test Your Water in Farmington Hills
With 152 PPM hardness, a quick test strip confirms whether your specific tap matches Farmington Hills's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request Great Lakes Water Authority's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Farmington Hills's Water Supply
Water Utility: Great Lakes Water Authority
Water Source: Lake Huron via Detroit system (Surface Water)
Population Served: 56,823
Hardness: 152 PPM (8.9 grains per gallon)
Farmington Hills's drinking water comes from surface sources — Lake Huron via Detroit system. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 57,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request Great Lakes Water Authority's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by Great Lakes Water Authority in Farmington Hills, MI, including ZIP codes:
48301, 48332, 48333, 48334, 48336
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Farmington Hills
At 152 PPM (8.9 GPG), here is how to size a softener for your Farmington Hills home. Multiply hardness in GPG (8.9) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 8.9 GPG × 200 gal = 1780 grains/day. Over a 7-day regeneration cycle, that is 12,460 grains - a 32,000-grain softener is the right fit for most Farmington Hills households.
Compare Farmington Hills to Other Michigan Cities
Frequently Asked Questions About Farmington Hills Water
Is Farmington Hills tap water safe to drink?
Where does Farmington Hills's water come from?
Do I need a water softener in Farmington Hills?
Does Farmington Hills water damage tankless water heaters?
How much does hard water cost a Farmington Hills household per year?
What is the hardness of Farmington Hills water in grains per gallon?
What size water softener do I need for Farmington Hills?
Salt-based softener or salt-free conditioner for Farmington Hills?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Farmington Hills Homeowners Actually Buy
Common purchases for homes with 152 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Farmington Hills's water data.