Auburn Hills vs Saginaw Water Quality
Side-by-side water quality comparison for two Michigan cities.
If you are comparing Auburn Hills and Saginaw water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Auburn Hills has significantly harder water at 280 PPM versus Saginaw at 180 PPM, a difference of 100 PPM. At 280 PPM, Auburn Hills residents should budget for a water softener ($600-$1,500 installed). Without one, expect scale buildup on fixtures, reduced water heater efficiency, extra soap and detergent use, and shorter appliance lifespans. Saginaw also has hard water but to a lesser degree.
Both cities have hard water, but Auburn Hills's higher hardness means more aggressive scale buildup and higher household impact.
Water sources and why they differ
Water sources differ: Auburn Hills draws from Detroit Water (Lake Huron), while Saginaw uses Lake Huron via GLWA pipeline. Both use similar source types, but local geology creates the hardness variation.
What this means for you
If you are moving from Saginaw to Auburn Hills, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Auburn Hills | Saginaw |
|---|---|---|
| Hardness | 280 PPM | 180 PPM |
| GPG | 16.4 | 10.5 |
| TDS | 430 PPM | 212 PPM |
| Highest PFOA/PFOS | Not detected (reporting limit 4 ppt) | Not detected (reporting limit 4 ppt) |
| Lead | 0 ppb | 9 ppb |
| Chlorine | 1.2 mg/L | 0.7 mg/L |
| Level | Extremely Hard | Very Hard |