Is Ann Arbor South, MI Tap Water Safe to Drink?
Yes, Ann Arbor South tap water is safe to drink. No contaminants exceed health guidelines. However, Ann Arbor South has very hard water at 300 PPM, which will cause scale buildup in plumbing and appliances over time. A water softener is worth considering.
Hardness Scale: Where Ann Arbor South Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Ann Arbor South Compares
Ann Arbor South's water is 117% harder than the national average of 138 PPM. It ranks #37 out of 1000 cities in our database (harder than 96% of US cities we track). Within Michigan, Ann Arbor South has the 3rd hardest water out of 26 cities - 68% above the state average of 179 PPM. Among large cities (200k-500k), Ann Arbor South ranks #5 of 165 for hardness. At this hardness level, water heaters run an estimated 55% less efficiently due to scale insulation, and major water-using appliances typically last 4 years less than the national average lifespan.
What Ann Arbor South's Water Means for Your Home
Hardness: 300 PPM - Treatment Recommended
Ann Arbor South has some exceptionally hard water. At 300 PPM (17.5 grains per gallon), your tap is loaded with mineral content carried in from the watershed geology. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 300 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Ann Arbor South homeowners don't realize it until the plumber shows up. That's 68% harder than the Michigan average.
Contaminants & Safety
Disinfection byproducts are the notable finding here. Ann Arbor South's water has TTHMs at 4.49 ppb and HAA5 at 6.6 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.
What's in the Treatment Process
Ann Arbor South's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 4.49 ppb (6% of the legal limit, but 30x the EWG guideline) and HAA5 at 6.6 ppb (11% of the legal limit, but 66x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.
Chromium-6 was detected at 0.226 ppb, which is 11x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 300 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 300 PPM | < 60 PPM | No federal limit | ⚠ Very Hard |
| Total Dissolved Solids | 460 PPM | < 300 PPM | 500 PPM | ⚠ Elevated |
| PFAS (total) | 13.2 ppt | — | No total limit | Detected |
| ↳ PFOA | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| ↳ PFOS | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| Lead | 2.3 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ✓ Low |
| Chlorine / Chloramine | 1.2 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | 0.458 mg/L | 5 mg/L | 10 mg/L | ✓ OK |
Recommendations for Ann Arbor South Homes
Our Top Picks for Ann Arbor South (300 PPM)
Hard water at 300 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Quick Fix for Chlorine: Shower Filter
At 1.2 mg/L chlorine, many Ann Arbor South residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Ann Arbor South
With 300 PPM hardness, a quick test strip confirms whether your specific tap matches Ann Arbor South's average before you invest in a softener. Hardness can vary within the same system.
Free option: Request City of Ann Arbor Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Ann Arbor South's Water Supply
Water Utility: City of Ann Arbor Water
Water Source: Huron River + wells (Surface Water)
Population Served: 241,868
Hardness: 300 PPM (17.5 grains per gallon)
Ann Arbor South's drinking water comes from surface sources — Huron River + wells. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 242,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Ann Arbor Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by City of Ann Arbor Water in Ann Arbor South, MI, including ZIP codes:
48110, 48159, 48160, 48176, 48190, 48191, 48197, 48198, 49229, 49286
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Ann Arbor South
At 300 PPM (17.5 GPG), here is how to size a softener for your Ann Arbor South home. Multiply hardness in GPG (17.5) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 17.5 GPG × 200 gal = 3500 grains/day. Over a 7-day regeneration cycle, that is 24,500 grains - a 32,000-grain softener is the right fit for most Ann Arbor South households.
Compare Ann Arbor South to Other Michigan Cities
Frequently Asked Questions About Ann Arbor South Water
Is Ann Arbor South tap water safe to drink?
Where does Ann Arbor South's water come from?
Do I need a water softener in Ann Arbor South?
Does Ann Arbor South water damage tankless water heaters?
How much does hard water cost a Ann Arbor South household per year?
What is the hardness of Ann Arbor South water in grains per gallon?
What size water softener do I need for Ann Arbor South?
Salt-based softener or salt-free conditioner for Ann Arbor South?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Ann Arbor South Homeowners Actually Buy
Common purchases for homes with 300 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Ann Arbor South's water data.