Georgetown vs London Water Quality
Side-by-side water quality comparison for two Kentucky cities.
If you are comparing Georgetown and London water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Georgetown has significantly harder water at 160 PPM versus London at 85 PPM, a difference of 75 PPM. At 160 PPM, Georgetown residents will notice spotting and reduced soap efficiency. A softener is recommended for long-term appliance protection. London has moderate hardness where a softener is optional.
This difference has real practical impact. Georgetown homeowners deal with scale buildup on water heaters, extra soap and detergent use, and shorter appliance lifespans that London residents largely avoid.
Water sources and why they differ
Water sources differ: Georgetown draws from Royal Springs & Elkhorn Creek, while London uses Laurel River Lake. Both use similar source types, but local geology creates the hardness variation.
Contaminant concerns
PFAS contamination is a concern in Georgetown (60.18 ppt, above the EPA limit of 4 ppt). A reverse osmosis system or NSF P473-certified filter is recommended for drinking water.
What this means for you
If you are moving from London to Georgetown, you will notice the water difference. Budget for a water softener and expect to use more soap and detergent until you install one.
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Georgetown | London |
|---|---|---|
| Hardness | 160 PPM | 85 PPM |
| GPG | 9.4 | 5 |
| TDS | 214 PPM | 145 PPM |
| PFAS | 60.18 ppt | 3.2 ppt |
| Lead | 5 ppb | 2 ppb |
| Chlorine | 0.8 mg/L | 1.1 mg/L |
| Level | Hard | Moderately Hard |