Is Evanston, IL Tap Water Safe to Drink?

B
Good1 item found

No EPA health-limit violations for Evanston's water system since November 2023, with one item to watch. Worth watching: lead at 6.5 ppb. Water hardness is estimated at 140 PPM (hard), which causes scale in plumbing and appliances.

Evanston (EPA ID IL0310810) · Source: Surface water · System serves 74,486 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2026–Dec 2026 testing · PFAS & lithium: EPA UCMR 5, Jun 2023–Mar 2024 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Evanston

No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Evanston since November 2023.

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID IL0310810. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

140
Hardness (PPM, est.)
252
IL Average
136
National Avg
ND
PFOA/PFOS not detected (reporting limit 4 ppt)
6.5
Lead (ppb)
140 PPM Hard
CONTAMINANT LEVELS Hardness (est.) 140 PPM TDS (est.) 185 PPM PFOA/PFOS ND Lead 6.5 ppb Chlorine (est.) 1.3 mg/L Nitrate 0.35 mg/L
Estimated water hardness gauge for Evanston IL showing 140 PPM HardWater quality levels in Evanston IL compared to EPA limits - estimated hardness 140 PPM, PFOA/PFOS not detected (reporting limit 4 ppt), lead 6.5 ppb

Hardness Scale: Where Evanston Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+
Hard water (est.)Elevated lead levels

How Evanston Compares

Evanston's water is 3% harder than the national average of 136 PPM. It ranks #422 out of 914 cities in our database (harder than 54% of US cities we track). Within Illinois, it ranks #27 of 28 cities (44% below the state average of 252 PPM). Among cities (50k-100k), Evanston ranks #144 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.

What Evanston's Water Means for Your Home

Hardness: 140 PPM - Treatment Recommended

Evanston's water is hard at 140 PPM (8.2 GPG). That's enough to notice every day: gradual scale on fixtures, spots on dishes, soap that doesn't lather the way it should. That's 44% softer than the Illinois average. Homeowners who install a water softener or salt-free conditioner notice the difference fast: better lathering, cleaner dishes, and appliances that last longer. That adds up. Hard water at 140 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Evanston homeowners don't realize it until the plumber shows up.

Contaminants & Safety

Lead levels deserve attention. At 6.5 ppb, Evanston is above the ideal of zero, though below the EPA action level of 15 ppb (dropping to 10 ppb in November 2027 under the Lead and Copper Rule Improvements). The lead typically comes from aging service lines or interior plumbing, not the treatment plant. A point-of-use filter certified for lead at the kitchen faucet is a practical safeguard, especially in older homes.

What's in the Treatment Process

Evanston's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 24.5 ppb (31% of the legal limit, but 163x the EWG guideline) and HAA5 at 11.3 ppb (19% of the legal limit, but 113x the EWG guideline). These EWG-reported values are below the legal limits, and the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.209 ppb, which is 10x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

How Hard Water Affects Your Home

At 140 PPM, untreated hard water has measurable effects on household costs and appliance life:

  • Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
  • Soap and detergent: Hard water reduces lathering, requiring significantly more product
  • Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
  • Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service

Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.

Water quality contaminant levels for Evanston, IL
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
↳ Total PFAS (average of all samples)None detected (EPA reporting limits 3–20 ppt)—No total limitNot detected
Lead (90th percentile, Dec 2026)6.5 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)Elevated
Nitrate (EWG data)0.35 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~140 PPMNot a health issueNo federal limitHard
Total Dissolved Solids (estimate)~185 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1.3 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Jun 2023–Mar 2024)

Average across 4 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Our Top Picks for Evanston (140 PPM)

Hard water at 140 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.

Quick Fix for Chlorine: Shower Filter

At 1.3 mg/L chlorine, many Evanston residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Evanston

Lead enters water from your home's plumbing, not the treatment plant — so Evanston's city-wide average of 6.5 ppb may not match your tap. Testing your specific faucet is the only way to know. Run cold water for 30 seconds before collecting a sample.

Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. Worth it for confirming lead levels at your specific tap.

Tap Score Lab Kit
Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Softener: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your softener is actually working. Test before and after.

HoneForest TDS Meter

Free option: Request City of Evanston Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Evanston's Water Supply

Water Utility: City of Evanston Water

Water Source: Lake Michigan (Surface Water)

Population Served: 74,486

Hardness: 140 PPM (8.2 grains per gallon)

Evanston's drinking water comes from surface sources — Lake Michigan. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. Despite the treatment process, mineral hardness from the watershed carries through. The system serves 74,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Evanston Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Evanston

This report is for the water system serving Evanston, IL (City of Evanston Water). ZIP codes in and near this area:

60022, 60025, 60026, 60029, 60043, 60053, 60065, 60068, 60076, 60077, 60082, 60091, 60093, 60201, 60202, 60203, 60204, 60208, 60209, 60712, 60714

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Water Softener Sizing for Evanston

At 140 PPM (8.2 GPG), here is how to size a softener for your Evanston home. Multiply hardness in GPG (8.2) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 8.2 GPG × 300 gal = 2,460 grains/day. Over a 7-day regeneration cycle, that is 17,220 grains - a 24,000-grain softener is the right fit for most Evanston households.

Compare Evanston to Other Illinois Cities

Frequently Asked Questions About Evanston Water

Is Evanston tap water safe to drink?
No EPA health-limit violations for Evanston's water system since November 2023. Lead was 6.5 ppb (90th percentile) and PFOA/PFOS were below EPA's 4 ppt standard. This describes the water system; your home's plumbing can still add lead, so a tap test is how to be sure. Separately, 15 contaminants exceed the stricter health guidelines published by the Environmental Working Group (EWG), which are not legal limits.
Where does Evanston's water come from?
Evanston's drinking water is sourced from Lake Michigan and treated by City of Evanston Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts. Learn more about Lake Michigan
Do I need a water softener in Evanston?
It's worth considering. At 140 PPM, Evanston's water is hard. You'll notice gradual scale buildup over time. A salt-based softener or salt-free conditioner extends appliance life.
What water filter is best for Evanston?
The best filter depends on which contaminants you want to address. For lead, look for NSF/ANSI Standard 53 certification at the kitchen faucet. For chlorine taste and odor, an activated carbon filter is effective and affordable. See our softener vs. filter guide for the full breakdown.
Does Evanston water damage tankless water heaters?
Yes. Most manufacturers recommend below 7-11 GPG (120-188 PPM). At 8.2 GPG, Evanston's water exceeds this. Scale buildup in the heat exchanger reduces efficiency and can void warranties. A water softener upstream is the standard solution.
Do I need both a softener AND a filter in Evanston?
In Evanston, yes — they solve different problems. A softener removes hardness minerals (140 PPM) that cause scale and soap scum. A filter removes contaminants like lead (6.5 ppb). Install the softener first (whole-house), then a point-of-use filter at the kitchen sink for drinking water.
How much does hard water cost a Evanston household per year?
At 140 PPM, hard water increases household expenses through higher water heating bills (scale buildup insulates heating elements), more soap and detergent needed, shorter appliance lifespans, and increased plumbing maintenance. A water softener reduces these costs and typically pays for itself within a few years.
What is the hardness of Evanston water in grains per gallon?
Evanston's water hardness is 8.2 grains per gallon (GPG), which equals 140 parts per million (PPM). To convert: 1 GPG = 17.1 PPM.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

On a private well? This report covers Evanston's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Evanston in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →