Is Roswell, GA Tap Water Safe to Drink?

A
ExcellentNo concerns detected

Yes, Roswell tap water is safe to drink. Hardness is low at 37 PPM, and no contaminants exceed health guidelines. Most homes here don't need treatment.

Fulton County Water · Source: Chattahoochee River · Serves 14,300 residents ·

37
Hardness (PPM)
33
GA Average
138
National Avg
13.58
PFAS (ppt)
3.2
Lead (ppb)
37 PPM Slightly Hard
CONTAMINANT LEVELS Hardness 37 PPM TDS 85 PPM PFAS 13.58 ppt Lead 3.2 ppb Chlorine 1.2 mg/L Nitrate 0.632 mg/L
Water hardness gauge for Roswell GA showing 37 PPM Slightly HardWater quality contaminant levels in Roswell GA compared to EPA limits - hardness 37 PPM, PFAS 13.58 ppt, lead 3.2 ppb

Hardness Scale: Where Roswell Falls

Soft
0
Slightly
60
Moderate
120
Hard
180
Very Hard
250
Extreme
400+

How Roswell Compares

Roswell's water is 73% softer than the national average of 138 PPM - ranking in the bottom 78% for hardness nationwide. Most homes here do not need a softener. Within Georgia, it ranks #7 of 25 cities (12% above the state average of 33 PPM). Among smaller cities, Roswell ranks #194 of 288 for hardness.

What Roswell's Water Means for Your Home

Hardness: 37 PPM - Low Concern

Roswell's water is slightly hard at 37 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. Roswell is softer than 77% of US cities. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Disinfection byproducts are the notable finding here. Roswell's water has TTHMs at 38.3 ppb and HAA5 at 31.4 ppb — both within legal limits, but the EWG health guidelines are far stricter. These byproducts form when chlorine reacts with organic matter during treatment. A whole-house activated carbon filter reduces both chlorine and its byproducts. Want the full picture? Request your utility's annual Consumer Confidence Report.

What's in the Treatment Process

Roswell's surface water supply requires heavy chlorination to stay safe — but that creates a tradeoff. The treatment process generates disinfection byproducts: TTHMs at 38.3 ppb (48% of the legal limit, but 256x the EWG guideline) and HAA5 at 31.4 ppb (52% of the legal limit, but 314x the EWG guideline). These are within legal limits, but the EWG sets much tighter thresholds based on cancer-risk research. A whole-house activated carbon filter reduces both chlorine and byproducts.

Chromium-6 was detected at 0.0859 ppb, which is 4.3x the EWG health guideline. There's no separate federal limit for chromium-6, only total chromium. A reverse osmosis system is the most effective removal method. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.

Water quality contaminant levels for Roswell, GA
ContaminantDetectedHealth GuidelineLegal LimitStatus
Hardness (as CaCO₃)37 PPM< 60 PPMNo federal limit✓ OK
Total Dissolved Solids85 PPM< 300 PPM500 PPM✓ OK
PFAS (total)13.58 pptNo total limitDetected
↳ PFOA0 ppt0 ppt4 ppt (2024)✓ OK
↳ PFOS0 ppt0 ppt4 ppt (2024)✓ OK
Lead3.2 ppb0 ppb (no safe level)15 ppb (10 ppb in 2027)✓ Low
Chlorine / Chloramine1.2 mg/LTaste threshold ~1.04.0 mg/L✓ Normal
Nitrate0.632 mg/L5 mg/L10 mg/L✓ OK

Good news for Roswell residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.

Quick Fix for Chlorine: Shower Filter

At 1.2 mg/L chlorine, many Roswell residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Roswell

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Certified Lab Kit

Mail-in sample analyzed by a certified lab. 21+ parameters including PFAS, heavy metals, and bacteria. Recommended given elevated PFAS in your area.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request Fulton County Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Roswell's Water Supply

Water Utility: Fulton County Water

Water Source: Chattahoochee River (Surface Water)

Population Served: 14,300

Hardness: 37 PPM (2.2 grains per gallon)

Roswell's drinking water comes from surface sources — Chattahoochee River. Surface water requires more extensive treatment than groundwater, including coagulation, filtration, and disinfection. This heavier chlorination is why disinfection byproducts tend to be higher in surface-supplied systems. On the upside, surface sources often deliver softer water than deep aquifers. The system serves 14,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request Fulton County Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes Covered by This Report

This water quality data applies to all areas served by Fulton County Water in Roswell, GA, including ZIP codes:

30075, 30076, 30077, 30114, 30142, 30169

If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.

Compare Roswell to Other Georgia Cities

Frequently Asked Questions About Roswell Water

Is Roswell tap water safe to drink?
Yes, Roswell tap water is safe to drink. All regulated contaminants are within EPA limits. However, 10 contaminants exceed the stricter EWG health guidelines. Review the contaminant table above for details.
Where does Roswell's water come from?
Roswell's drinking water is sourced from Chattahoochee River and treated by Fulton County Water. Surface water requires more extensive treatment, including chlorination, which can produce disinfection byproducts. Learn more about Chattahoochee River
Do I need a water softener in Roswell?
At 37 PPM, Roswell's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Roswell's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Roswell has TTHMs at 38.3 ppb and HAA5 at 31.4 ppb — within legal limits but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Roswell's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.0859 ppb, which is 4.3x the EWG health guideline. There's no separate federal limit for chromium-6. It can come from industrial sources or natural geology. Reverse osmosis is the most effective removal method.
Why does Roswell water taste like chlorine?
Roswell's water contains 1.2 mg/L of chlorine. Chlorine is essential for safety but creates the "pool water" taste. Easiest fix: an activated carbon filter. For skin and hair in the shower, a shower filter ($30-$40) installs in minutes.
Can I drink Roswell tap water straight from the faucet?
Roswell's water meets all EPA legal standards. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
What water filter is best for Roswell?
The best filter depends on which contaminants you want to address. See our softener vs. filter guide for the full breakdown.

Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.

What Roswell Homeowners Actually Buy

Common purchases for homes with 37 PPM water.

Affiliate disclosure: we may earn a commission. Selection based on Roswell's water data.

On a private well? This report covers Roswell's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Get a personalized recommendation for Roswell in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →