Is Perry, GA Tap Water Safe to Drink?

A
ExcellentNo concerns detected

Yes, Perry tap water is safe to drink. Hardness is low at 35 PPM, and no contaminants exceed health guidelines. Most homes here don't need treatment.

City of Perry Water · Source: Groundwater · Serves 31,608 residents ·

35
Hardness (PPM)
33
GA Average
138
National Avg
0
PFAS (ppt)
0.4
Lead (ppb)
35 PPM Slightly Hard
CONTAMINANT LEVELS Hardness 35 PPM TDS 65 PPM PFAS 0 ppt Lead 0.4 ppb Chlorine 1.4 mg/L
Water hardness gauge for Perry GA showing 35 PPM Slightly HardWater quality contaminant levels in Perry GA compared to EPA limits - hardness 35 PPM, PFAS 0 ppt, lead 0.4 ppb

Hardness Scale: Where Perry Falls

Soft
0
Slightly
60
Moderate
120
Hard
180
Very Hard
250
Extreme
400+

How Perry Compares

Perry's water is 75% softer than the national average of 138 PPM - ranking in the bottom 80% for hardness nationwide. Most homes here do not need a softener. Within Georgia, it ranks #12 of 25 cities (6% above the state average of 33 PPM). Among smaller cities, Perry ranks #205 of 288 for hardness.

What Perry's Water Means for Your Home

Hardness: 35 PPM - Low Concern

Perry's water is slightly hard at 35 PPM. Most households won't notice any issues at this level. Scale buildup is minimal, and a water softener would be overkill. Perry is softer than 80% of US cities. If you're thinking about water treatment, contaminant filtration is where to focus your money, not softening.

Contaminants & Safety

Beyond hardness, Perry's water is within EPA guidelines for regulated contaminants. Chlorine sits at 1.4 mg/L — normal for municipal systems, but enough to notice. That said, 9 contaminants exceed EWG's stricter health guidelines — these are legal but worth understanding. If your water tastes like a pool or your skin feels dry after showers, a whole-house carbon filter is the simplest fix. A shower filter is a quick, affordable starting point that most people notice immediately. Want the full picture? Request your utility's annual Consumer Confidence Report for neighborhood-level data.

What's in the Treatment Process

Chromium-6 is naturally present in Perry's aquifer geology at 0.0587 ppb — 2.9x the EWG health guideline. There's no federal legal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.

Water quality contaminant levels for Perry, GA
ContaminantDetectedHealth GuidelineLegal LimitStatus
Hardness (as CaCO₃)35 PPM< 60 PPMNo federal limit✓ OK
Total Dissolved Solids65 PPM< 300 PPM500 PPM✓ OK
PFAS (total)0 pptNo total limit✓ ND
↳ PFOA0 ppt0 ppt4 ppt (2024)✓ OK
↳ PFOS0 ppt0 ppt4 ppt (2024)✓ OK
Lead0.4 ppb0 ppb (no safe level)15 ppb (10 ppb in 2027)✓ Low
Chlorine / Chloramine1.4 mg/LTaste threshold ~1.04.0 mg/L✓ Normal
NitrateNot reported5 mg/L10 mg/LN/A

Good news for Perry residents. Your water quality is generally good. Most homes in this area do not need a water softener. If you have concerns about lead (especially in buildings constructed before 1986) or chlorine taste, a point-of-use filter is the most practical and cost-effective solution.

Quick Fix for Chlorine: Shower Filter

At 1.4 mg/L chlorine, many Perry residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Perry

City-wide data is a solid starting point, but your specific tap might differ based on plumbing age, distance from the treatment plant, or seasonal changes.

Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Most Accurate: Certified Lab Kit

Mail-in sample analyzed by a certified lab. 21+ parameters including PFAS, heavy metals, and bacteria. Worth it if you have specific health concerns.

Tap Score Lab Kit
Verify Your Filter: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your filter is performing. Test before and after.

HoneForest TDS Meter

Free option: Request City of Perry Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Perry's Water Supply

Water Utility: City of Perry Water

Water Source: Groundwater (Groundwater)

Population Served: 31,608

Hardness: 35 PPM (2 grains per gallon)

Perry draws its drinking water from groundwater sources — Groundwater. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why mineral content varies by aquifer depth and geology. The geological profile determines hardness, iron, and trace mineral levels. The system serves 32,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Perry Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes Covered by This Report

This water quality data applies to all areas served by City of Perry Water in Perry, GA, including ZIP codes:

31001, 31006, 31007, 31010, 31011, 31013, 31015, 31023, 31025, 31030, 31036, 31037, 31041, 31047, 31051, 31055, 31057, 31060, 31063, 31068, 31069, 31070, 31071, 31072, 31076, 31077, 31079, 31081, 31083, 31084, 31091, 31092, 31539, 31544, 31549, 31701, 31702, 31703, 31704, 31705, 31706, 31707, 31708, 31709, 31711, 31712, 31714, 31719, 31735, 31743, 31750, 31760, 31763, 31764, 31772, 31780, 31782, 31783, 31787, 31790, 31796, 31806, 39885

If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.

Compare Perry to Other Georgia Cities

Frequently Asked Questions About Perry Water

Is Perry tap water safe to drink?
Yes, Perry tap water is safe to drink. All regulated contaminants are within EPA limits. However, 9 contaminants exceed the stricter EWG health guidelines. Review the contaminant table above for details.
Where does Perry's water come from?
Perry's drinking water is sourced from Groundwater and treated by City of Perry Water. Groundwater typically has higher mineral content but needs less chemical treatment than surface water.
Do I need a water softener in Perry?
At 35 PPM, Perry's water is on the soft side. A water softener isn't needed. Focus on filtration if you have specific contaminant concerns.
What are disinfection byproducts in Perry's water?
Disinfection byproducts form when chlorine reacts with organic matter during water treatment. Perry has TTHMs at 1.79 ppb and HAA5 at 0.478 ppb — within legal limits but above EWG health guidelines. A whole-house activated carbon filter reduces both chlorine and its byproducts.
Is chromium-6 in Perry's water?
Yes. Chromium-6 (hexavalent chromium) was detected at 0.0587 ppb, which is 2.9x the EWG health guideline. There's no separate federal limit for chromium-6. It occurs naturally in the local aquifer geology. Reverse osmosis is the most effective removal method.
Why does Perry water taste like chlorine?
Perry's water contains 1.4 mg/L of chlorine. Chlorine is essential for safety but creates the "pool water" taste. Easiest fix: an activated carbon filter. For skin and hair in the shower, a shower filter ($30-$40) installs in minutes.
Can I drink Perry tap water straight from the faucet?
Perry's water meets all EPA legal standards. For extra protection, a simple carbon filter improves taste and removes trace contaminants. Take our quiz to find the right solution.
What water filter is best for Perry?
The best filter depends on which contaminants you want to address. For chlorine taste and odor, an activated carbon filter is effective and affordable. See our softener vs. filter guide for the full breakdown.

Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.

What Perry Homeowners Actually Buy

Common purchases for homes with 35 PPM water.

Affiliate disclosure: we may earn a commission. Selection based on Perry's water data.

On a private well? This report covers Perry's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Get a personalized recommendation for Perry in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →