Is Sunrise, FL Tap Water Safe to Drink?

C
Fair1 item found

EPA data shows a health concern for Sunrise's water system. Specifically: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOA 4.8 ppt, PFOS 10 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 230 PPM (very hard), which causes scale in plumbing and appliances.

Sunrise Springtree (EPA ID FL4061410) · Source: Groundwater · System serves 79,550 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2023–Dec 2023 testing · PFAS & lithium: EPA UCMR 5, Oct 2023–Feb 2024 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Sunrise Springtree

No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Sunrise Springtree since November 2023.

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID FL4061410. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

230
Hardness (PPM, est.)
236
FL Average
136
National Avg
10
Highest PFOA/PFOS (ppt)
1.3
Lead (ppb)
230 PPM Very Hard
CONTAMINANT LEVELS Hardness (est.) 230 PPM TDS (est.) 299 PPM PFOA/PFOS 10 ppt Lead 1.3 ppb Chlorine (est.) 1.7 mg/L Nitrate 0.135 mg/L
Estimated water hardness gauge for Sunrise FL showing 230 PPM Very HardWater quality levels in Sunrise FL compared to EPA limits - estimated hardness 230 PPM, highest PFOA/PFOS average 10 ppt, lead 1.3 ppb

Hardness Scale: Where Sunrise Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+
PFOA/PFOS above EPA 2029 limitVery hard water (est.)

How Sunrise Compares

Sunrise's water is 69% harder than the national average of 136 PPM. It ranks #212 out of 914 cities in our database (harder than 77% of US cities we track). Within Florida, it ranks #35 of 60 cities (3% below the state average of 236 PPM). Among cities (50k-100k), Sunrise ranks #77 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.

What Sunrise's Water Means for Your Home

Hardness: 230 PPM - Treatment Recommended

Sunrise has some seriously hard water. At 230 PPM (13.5 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 230 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Sunrise homeowners don't realize it until the plumber shows up. That's 3% softer than the Florida average.

Contaminants & Safety

Forever chemicals (PFAS) are a serious concern here. Sunrise has PFOA at 4.8 ppt and PFOS at 10 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction — that's the certification that specifically tests for PFAS removal.

What's in the Treatment Process

Even though Sunrise draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 50 ppb and HAA5 at 26.3 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. The EWG-reported levels are below the legal limits but above the stricter EWG health guidelines.

Chromium-6 is naturally present in Sunrise's aquifer geology at 0.168 ppb — 8.4x the EWG health guideline. There's no federal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

How Hard Water Affects Your Home

At 230 PPM, untreated hard water has measurable effects on household costs and appliance life:

  • Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
  • Soap and detergent: Hard water reduces lathering, requiring significantly more product
  • Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
  • Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service

Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.

Water quality contaminant levels for Sunrise, FL
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)4.8 ppt0 ppt (EPA goal)4 ppt (from 2029)⚠ Above
PFOS (highest entry-point avg.)10 ppt0 ppt (EPA goal)4 ppt (from 2029)⚠ Above
↳ Total PFAS (average of all samples)35.2 ppt—No total limitDetected
Lead (90th percentile, Dec 2023)1.3 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)✓ Low
Nitrate (EWG data)0.135 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~230 PPMNot a health issueNo federal limitVery hard
Total Dissolved Solids (estimate)~299 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1.7 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Oct 2023–Feb 2024)

Average across 2 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 2 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Our Top Picks for Sunrise (230 PPM)

Hard water at 230 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.

Recommended Filter for Sunrise

PFAS exceed EPA limits (PFOA: 4.8 ppt, PFOS: 10 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.

Quick Fix for Chlorine: Shower Filter

At 1.7 mg/L chlorine, many Sunrise residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Sunrise

With PFAS at 35.2 ppt in Sunrise's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.

Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. For PFAS, order a dedicated PFAS lab test.

Tap Score Lab Kit
Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Softener: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your softener is actually working. Test before and after.

HoneForest TDS Meter

Free option: Request City of Sunrise Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Sunrise's Water Supply

Water Utility: City of Sunrise Water

Water Source: Biscayne Aquifer (Groundwater)

Population Served: 79,550

Hardness: 230 PPM (13.5 grains per gallon)

Sunrise draws its drinking water from groundwater sources — Biscayne Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 80,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Sunrise Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Sunrise

This report is for the water system serving Sunrise, FL (City of Sunrise Water). ZIP codes in and near this area:

33322

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Water Softener Sizing for Sunrise

At 230 PPM (13.5 GPG), here is how to size a softener for your Sunrise home. Multiply hardness in GPG (13.5) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 13.5 GPG × 300 gal = 4,050 grains/day. Over a 7-day regeneration cycle, that is 28,350 grains - a 32,000-grain softener is the right fit for most Sunrise households.

Compare Sunrise to Other Florida Cities

Frequently Asked Questions About Sunrise Water

Is Sunrise tap water safe to drink?
EPA data shows a health concern for Sunrise's water system: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOA 4.8 ppt, PFOS 10 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A filter certified for the specific contaminant (PFAS, lead) reduces what you drink. See the EPA violations section above for dates and status.
Where does Sunrise's water come from?
Sunrise's drinking water is sourced from Biscayne Aquifer and treated by City of Sunrise Water. Groundwater typically has higher mineral content but needs less chemical treatment than surface water. Learn more about Biscayne Aquifer
Do I need a water softener in Sunrise?
Yes. At 230 PPM (13.5 GPG), Sunrise's water is very hard. Without a softener, expect visible scale buildup, reduced water heater efficiency, spotted dishes, and soap that doesn't lather well. A salt-based water softener is the standard solution.
How do I remove PFAS from Sunrise tap water?
Sunrise has PFAS above EPA limits (PFOA: 4.8 ppt, PFOS: 10 ppt — limit is 4 ppt each). Reverse osmosis and granular activated carbon both reduce PFAS by 95-99%. For most homes, a point-of-use RO system under the kitchen sink is most practical. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Standard pitcher filters do not adequately reduce PFAS.
What water filter is best for Sunrise?
The best filter depends on which contaminants you want to address. For PFAS, look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Granular activated carbon and reverse osmosis are both effective. For chlorine taste and odor, an activated carbon filter is effective and affordable. See our softener vs. filter guide for the full breakdown.
Is Sunrise water safe for babies and infants?
Caution is warranted for Sunrise water and infant formula. Concerns: PFAS above EPA limits (PFOA: 4.8 ppt, PFOS: 10 ppt). Use filtered water (reverse osmosis or NSF-certified) or bottled water for formula preparation.
Does Sunrise water damage tankless water heaters?
Yes. Most manufacturers recommend below 7-11 GPG (120-188 PPM). At 13.5 GPG, Sunrise's water exceeds this. Scale buildup in the heat exchanger reduces efficiency and can void warranties. A water softener upstream is the standard solution.
Do I need both a softener AND a filter in Sunrise?
In Sunrise, yes — they solve different problems. A softener removes hardness minerals (230 PPM) that cause scale and soap scum. A filter removes contaminants like PFOA/PFOS (up to 10 ppt). Install the softener first (whole-house), then a point-of-use filter at the kitchen sink for drinking water.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Sunrise Homes

Prioritized for contaminant reduction for homes with 230 PPM water and PFAS above EPA limits.

Affiliate disclosure: we may earn a commission. Selection based on Sunrise's water data.

On a private well? This report covers Sunrise's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Sunrise in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →