Is Ormond Beach, FL Tap Water Safe to Drink?
Yes, Ormond Beach tap water is safe to drink. No contaminants exceed health guidelines. However, Ormond Beach has very hard water at 250 PPM, which will cause scale buildup in plumbing and appliances over time. A water softener is worth considering.
Hardness Scale: Where Ormond Beach Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Ormond Beach Compares
Ormond Beach's water is 81% harder than the national average of 138 PPM. It ranks #187 out of 1000 cities in our database (harder than 81% of US cities we track). Within Florida, it ranks #19 of 64 cities (6% above the state average of 236 PPM). Among cities (50k-100k), Ormond Beach ranks #62 of 258 for hardness. At this hardness level, water heaters run an estimated 46% less efficiently due to scale insulation, and major water-using appliances typically last 4 years less than the national average lifespan.
What Ormond Beach's Water Means for Your Home
Hardness: 250 PPM - Treatment Recommended
Ormond Beach has some extremely hard water. At 250 PPM (14.6 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 250 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Ormond Beach homeowners don't realize it until the plumber shows up. That's 6% harder than the Florida average.
Contaminants & Safety
Lead levels deserve attention. At 9.9 ppb, Ormond Beach is above the ideal of zero, though below the EPA action level of 15 ppb (dropping to 10 ppb in November 2027 under the Lead and Copper Rule Improvements). The lead typically comes from aging service lines or interior plumbing, not the treatment plant. A point-of-use filter certified for lead at the kitchen faucet is a practical safeguard, especially in older homes.
What's in the Treatment Process
Even though Ormond Beach draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 32.4 ppb and HAA5 at 16.7 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. All levels are within legal limits, though above the stricter EWG health guidelines.
Chromium-6 is naturally present in Ormond Beach's aquifer geology at 0.135 ppb — 6.8x the EWG health guideline. There's no federal legal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 250 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 250 PPM | < 60 PPM | No federal limit | ⚠ Very Hard |
| Total Dissolved Solids | 390 PPM | < 300 PPM | 500 PPM | ⚠ Elevated |
| PFAS (total) | 0 ppt | — | No total limit | ✓ ND |
| ↳ PFOA | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| ↳ PFOS | 0 ppt | 0 ppt | 4 ppt (2024) | ✓ OK |
| Lead | 9.9 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ⚠ Elevated |
| Chlorine / Chloramine | 1.4 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | 0.215 mg/L | 5 mg/L | 10 mg/L | ✓ OK |
Recommendations for Ormond Beach Homes
Our Top Picks for Ormond Beach (250 PPM)
Hard water at 250 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Quick Fix for Chlorine: Shower Filter
At 1.4 mg/L chlorine, many Ormond Beach residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Ormond Beach
Lead enters water from your home's plumbing, not the treatment plant — so Ormond Beach's city-wide average of 9.9 ppb may not match your tap. Testing your specific faucet is the only way to know. Run cold water for 30 seconds before collecting a sample.
Free option: Request City of Ormond Beach Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Ormond Beach's Water Supply
Water Utility: City of Ormond Beach Water
Water Source: Floridan Aquifer (Groundwater)
Population Served: 59,744
Hardness: 250 PPM (14.6 grains per gallon)
Ormond Beach draws its drinking water from groundwater sources — Floridan Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 60,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Ormond Beach Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by City of Ormond Beach Water in Ormond Beach, FL, including ZIP codes:
32105, 32173, 32174, 32175, 32176, 32180
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Ormond Beach
At 250 PPM (14.6 GPG), here is how to size a softener for your Ormond Beach home. Multiply hardness in GPG (14.6) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 14.6 GPG × 200 gal = 2920 grains/day. Over a 7-day regeneration cycle, that is 20,440 grains - a 32,000-grain softener is the right fit for most Ormond Beach households.
Compare Ormond Beach to Other Florida Cities
Frequently Asked Questions About Ormond Beach Water
Is Ormond Beach tap water safe to drink?
Where does Ormond Beach's water come from?
Do I need a water softener in Ormond Beach?
What water filter is best for Ormond Beach?
Does Ormond Beach water damage tankless water heaters?
Do I need both a softener AND a filter in Ormond Beach?
How much does hard water cost a Ormond Beach household per year?
What is the hardness of Ormond Beach water in grains per gallon?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Ormond Beach Homeowners Actually Buy
Common purchases for homes with 250 PPM water.
Affiliate disclosure: we may earn a commission. Selection based on Ormond Beach's water data.