Is Margate, FL Tap Water Safe to Drink?
Margate tap water is legally compliant, but one contaminant exceeds health guidelines. Specifically: PFAS above EPA limits (PFOA: 5.95 ppt, PFOS: 24.95 ppt — limit is 4 ppt each). A point-of-use filter is recommended for drinking and cooking water. Margate also has very hard water at 232 PPM.
Hardness Scale: Where Margate Falls
0Slightly
60Moderate
120Hard
180Very Hard
250Extreme
400+
How Margate Compares
Margate's water is 68% harder than the national average of 138 PPM. It ranks #235 out of 1000 cities in our database (harder than 77% of US cities we track). Within Florida, it ranks #36 of 64 cities (2% below the state average of 236 PPM). Among cities (50k-100k), Margate ranks #77 of 258 for hardness. At this hardness level, water heaters run an estimated 43% less efficiently due to scale insulation, and major water-using appliances typically last 3 years less than the national average lifespan.
What Margate's Water Means for Your Home
Hardness: 232 PPM - Treatment Recommended
Margate has some seriously hard water. At 232 PPM (13.6 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 232 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Margate homeowners don't realize it until the plumber shows up. That's 2% softer than the Florida average.
Contaminants & Safety
Forever chemicals (PFAS) are a serious concern here. Margate has PFOA at 5.95 ppt and PFOS at 24.95 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF P473 certification — that's the standard that specifically tests for PFAS removal.
What's in the Treatment Process
Even though Margate draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 13.9 ppb and HAA5 at 16.1 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. All levels are within legal limits, though above the stricter EWG health guidelines.
Chromium-6 is naturally present in Margate's aquifer geology at 0.19 ppb — 9.5x the EWG health guideline. There's no federal legal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. All measurements are within federal legal limits. The EWG guidelines represent a more conservative, health-based standard.
How Hard Water Affects Your Home
At 232 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder (DOE estimates up to 22% more energy for heavily scaled units)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Contaminant | Detected | Health Guideline | Legal Limit | Status |
|---|---|---|---|---|
| Hardness (as CaCO₃) | 232 PPM | < 60 PPM | No federal limit | ⚠ Very Hard |
| Total Dissolved Solids | 336 PPM | < 300 PPM | 500 PPM | ⚠ Elevated |
| PFAS (total) | 82.5 ppt | — | No total limit | Detected |
| ↳ PFOA | 5.95 ppt | 0 ppt | 4 ppt (2024) | ⚠ Exceeds |
| ↳ PFOS | 24.95 ppt | 0 ppt | 4 ppt (2024) | ⚠ Exceeds |
| Lead | 1.3 ppb | 0 ppb (no safe level) | 15 ppb (10 ppb in 2027) | ✓ Low |
| Chlorine / Chloramine | 1.7 mg/L | Taste threshold ~1.0 | 4.0 mg/L | ✓ Normal |
| Nitrate | Not reported | 5 mg/L | 10 mg/L | N/A |
Recommendations for Margate Homes
Our Top Picks for Margate (232 PPM)
Hard water at 232 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Recommended Filter for Margate
PFAS exceed EPA limits (PFOA: 5.95 ppt, PFOS: 24.95 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.
Quick Fix for Chlorine: Shower Filter
At 1.7 mg/L chlorine, many Margate residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.
How to Test Your Water in Margate
With PFAS at 82.5 ppt in Margate's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.
Free option: Request City of Margate Water's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Margate's Water Supply
Water Utility: City of Margate Water
Water Source: Biscayne Aquifer (Groundwater)
Population Served: 62,254
Hardness: 232 PPM (13.6 grains per gallon)
Margate draws its drinking water from groundwater sources — Biscayne Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 62,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Margate Water's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes Covered by This Report
This water quality data applies to all areas served by City of Margate Water in Margate, FL, including ZIP codes:
33063, 33066, 33069, 33093
If your ZIP code is listed above, this report covers your water supply. Water quality may vary slightly by neighborhood.
Water Softener Sizing for Margate
At 232 PPM (13.6 GPG), here is how to size a softener for your Margate home. Multiply hardness in GPG (13.6) by daily water usage (roughly 50 gallons per person). A family of four uses about 200 gallons/day: 13.6 GPG × 200 gal = 2720 grains/day. Over a 7-day regeneration cycle, that is 19,040 grains - a 32,000-grain softener is the right fit for most Margate households.
Compare Margate to Other Florida Cities
Frequently Asked Questions About Margate Water
Is Margate tap water safe to drink?
Where does Margate's water come from?
Do I need a water softener in Margate?
How do I remove PFAS from Margate tap water?
What water filter is best for Margate?
Is Margate water safe for babies and infants?
Does Margate water damage tankless water heaters?
Do I need both a softener AND a filter in Margate?
Data sources: Lead and copper data from EPA Safe Drinking Water Act LCR reporting. Contaminant data from utility-reported testing results. PFAS data from EPA UCMR5 (2023–2025). Hardness from USGS and municipal reports. Data reflects system-level testing results and may not match your specific tap due to neighborhood plumbing, season, or recent utility changes. For your utility's latest results, request their Consumer Confidence Report (CCR). Our methodology. Last updated: 2026-02-24.
What Margate Homeowners Actually Buy
Prioritized for contaminant reduction for homes with 232 PPM water and PFAS above EPA limits.
Affiliate disclosure: we may earn a commission. Selection based on Margate's water data.