Is Boynton Beach, FL Tap Water Safe to Drink?
EPA data shows a health concern for Boynton Beach's water system. Specifically: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOA 8.5 ppt, PFOS 25 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 245 PPM (very hard), which causes scale in plumbing and appliances.
EPA health violations for Boynton Beach PWS
No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Boynton Beach PWS since November 2023.
Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID FL4500145. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

Hardness Scale: Where Boynton Beach Falls
0Slightly
17Moderate
60Hard
120Very Hard
180Extreme
250+
How Boynton Beach Compares
Boynton Beach's water is 80% harder than the national average of 136 PPM. It ranks #172 out of 914 cities in our database (harder than 81% of US cities we track). Within Florida, it ranks #23 of 60 cities (4% above the state average of 236 PPM). Among mid-size cities (100k-200k), Boynton Beach ranks #37 of 186 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.
What Boynton Beach's Water Means for Your Home
Hardness: 245 PPM - Treatment Recommended
Boynton Beach has some seriously hard water. At 245 PPM (14.3 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 245 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Boynton Beach homeowners don't realize it until the plumber shows up. That's 4% harder than the Florida average.
Contaminants & Safety
Forever chemicals (PFAS) are a serious concern here. Boynton Beach has PFOA at 8.5 ppt and PFOS at 25 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction — that's the certification that specifically tests for PFAS removal.
What's in the Treatment Process
Even though Boynton Beach draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 13 ppb and HAA5 at 10.4 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. The EWG-reported levels are below the legal limits but above the stricter EWG health guidelines.
Chromium-6 is naturally present in Boynton Beach's aquifer geology at 0.0639 ppb — 3.2x the EWG health guideline. There's no federal limit for chromium-6 specifically (only total chromium), which is why EWG tracks it separately. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.
How Hard Water Affects Your Home
At 245 PPM, untreated hard water has measurable effects on household costs and appliance life:
- Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
- Soap and detergent: Hard water reduces lathering, requiring significantly more product
- Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
- Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service
Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.
| Measure | Result | Guideline | Legal Limit | Status |
|---|---|---|---|---|
| PFOA (highest entry-point avg.) | 8.5 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ⚠ Above |
| PFOS (highest entry-point avg.) | 25 ppt | 0 ppt (EPA goal) | 4 ppt (from 2029) | ⚠ Above |
| ↳ Total PFAS (average of all samples) | 37.25 ppt | — | No total limit | Detected |
| Lead (90th percentile, Dec 2025) | 4.4 ppb | 0 ppb (no safe level) | Action level 15 ppb (10 ppb from Nov 2027) | ✓ Low |
| Nitrate (EWG data) | 0.206 mg/L | 5 mg/L (CheckMyTap flag, half the limit) | 10 mg/L | ✓ OK |
| Hardness (estimate) | ~245 PPM | Not a health issue | No federal limit | Very hard |
| Total Dissolved Solids (estimate) | ~369 PPM | 500 PPM (taste, not enforceable) | No federal limit | OK |
| Chlorine / Chloramine (estimate) | ~0.6 mg/L | Taste threshold ~1.0 | 4.0 mg/L | Normal |
Lithium (EPA testing, Sep 2023–Apr 2024)
Average across 4 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 4 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean
Recommendations for Boynton Beach Homes
Our Top Picks for Boynton Beach (245 PPM)
Hard water at 245 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.
Recommended Filter for Boynton Beach
PFAS exceed EPA limits (PFOA: 8.5 ppt, PFOS: 25 ppt — limit: 4 ppt each). A certified filter reduces these contaminants effectively.
How to Test Your Water in Boynton Beach
With PFAS at 37.25 ppt in Boynton Beach's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.
Free option: Request City of Boynton Beach Utilities's annual Consumer Confidence Report for official city-level data.
📊 Already Tested Your Water?
City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.
We review every submission before publishing. Your ZIP is shown; your identity is not.
About Boynton Beach's Water Supply
Water Utility: City of Boynton Beach Utilities
Water Source: Biscayne Aquifer (Groundwater)
Population Served: 112,000
Hardness: 245 PPM (14.3 grains per gallon)
Boynton Beach draws its drinking water from groundwater sources — Biscayne Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 112,000 residents.
Water quality can vary by neighborhood and season. For your exact numbers, request City of Boynton Beach Utilities's Consumer Confidence Report (CCR) or test your own tap.
ZIP Codes In and Near Boynton Beach
This report is for the water system serving Boynton Beach, FL (City of Boynton Beach Utilities). ZIP codes in and near this area:
33424, 33425, 33426, 33435, 33436, 33437, 33444, 33445, 33448, 33472, 33473, 33474, 33482, 33483, 33484
A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.
Water Softener Sizing for Boynton Beach
At 245 PPM (14.3 GPG), here is how to size a softener for your Boynton Beach home. Multiply hardness in GPG (14.3) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 14.3 GPG × 300 gal = 4,290 grains/day. Over a 7-day regeneration cycle, that is 30,030 grains - a 32,000-grain softener is the right fit for most Boynton Beach households.
Compare Boynton Beach to Other Florida Cities
Frequently Asked Questions About Boynton Beach Water
Is Boynton Beach tap water safe to drink?
Where does Boynton Beach's water come from?
Do I need a water softener in Boynton Beach?
How do I remove PFAS from Boynton Beach tap water?
What water filter is best for Boynton Beach?
Is Boynton Beach water safe for babies and infants?
Does Boynton Beach water damage tankless water heaters?
Do I need both a softener AND a filter in Boynton Beach?
Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.
Common Options for Boynton Beach Homes
Prioritized for contaminant reduction for homes with 245 PPM water and PFAS above EPA limits.
Affiliate disclosure: we may earn a commission. Selection based on Boynton Beach's water data.