Is Apopka, FL Tap Water Safe to Drink?

C
Fair1 item found

EPA data shows a health concern for Apopka's water system. Specifically: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOS 12 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A point-of-use filter certified for the specific contaminant can reduce what you drink while the utility addresses it. Water hardness is estimated at 252 PPM (extremely hard), which causes scale in plumbing and appliances.

Apopka, City of (5 Wtps) (EPA ID FL3480200) · Source: Groundwater · System serves 71,917 people

Data as of · EPA violations: as of October 14, 2026 · Lead: Jan 2023–Dec 2023 testing · PFAS & lithium: EPA UCMR 5, Mar 2024–Sep 2024 · Other contaminants: EWG Tap Water Database (data as of Feb 2026) · Hardness, TDS & chlorine: estimates

EPA health violations for Apopka, City of (5 Wtps)

No health-based violations (exceeding a contaminant or disinfectant limit, or missing a required treatment step) reported to EPA for Apopka, City of (5 Wtps) since November 2023.

Source: EPA Safe Drinking Water Information System (SDWIS) via ECHO, data as of October 14, 2026, EPA system ID FL3480200. Covers health-based violations since November 2023; monitoring and reporting violations are not shown. Look up the system on EPA ECHO.

252
Hardness (PPM, est.)
236
FL Average
136
National Avg
12
Highest PFOA/PFOS (ppt)
0
Lead (ppb)
252 PPM Extremely Hard
CONTAMINANT LEVELS Hardness (est.) 252 PPM TDS (est.) 444 PPM PFOA/PFOS 12 ppt Lead 0 ppb Chlorine (est.) 1 mg/L Nitrate 0.0778 mg/L
Estimated water hardness gauge for Apopka FL showing 252 PPM Extremely HardWater quality levels in Apopka FL compared to EPA limits - estimated hardness 252 PPM, highest PFOA/PFOS average 12 ppt, lead 0 ppb

Hardness Scale: Where Apopka Falls

Soft
0
Slightly
17
Moderate
60
Hard
120
Very Hard
180
Extreme
250+
PFOA/PFOS above EPA 2029 limitExtremely hard water (est.)

How Apopka Compares

Apopka's water is 85% harder than the national average of 136 PPM. It ranks #147 out of 914 cities in our database (harder than 84% of US cities we track). Within Florida, it ranks #13 of 60 cities (7% above the state average of 236 PPM). Among cities (50k-100k), Apopka ranks #53 of 260 for hardness. At this hardness level, scale buildup makes water heaters work harder and can shorten the lifespan of water-using appliances like dishwashers and washing machines.

What Apopka's Water Means for Your Home

Hardness: 252 PPM - Treatment Recommended

Apopka has some extremely hard water. At 252 PPM (14.7 grains per gallon), your tap is loaded with dissolved calcium and magnesium picked up from underground limestone and dolomite formations. Here's the thing: it's perfectly safe to drink. The minerals won't hurt you. But they will hurt your wallet. That adds up. Hard water at 252 PPM increases household costs through scale-coated water heaters that use more energy, extra soap and detergent, and appliances that wear out faster. Most Apopka homeowners don't realize it until the plumber shows up. That's 7% harder than the Florida average.

Contaminants & Safety

Forever chemicals (PFAS) are a serious concern here. Apopka has PFOS at 12 ppt — the EPA's 2024 limit is 4 ppt for PFOA and PFOS individually. PFAS don't break down in your body or the environment. Research links long-term exposure to increased cancer risk, thyroid issues, and immune system problems. The fix: a whole-house activated carbon filter or a point-of-use reverse osmosis system. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction — that's the certification that specifically tests for PFAS removal.

What's in the Treatment Process

Even though Apopka draws from groundwater, the treatment process still generates disinfection byproducts: TTHMs at 45.7 ppb and HAA5 at 23.2 ppb. Groundwater typically needs less treatment than surface water, but when organic compounds are present in the aquifer, chlorination creates the same byproducts. The EWG-reported levels are below the legal limits but above the stricter EWG health guidelines. The EWG guidelines represent a more conservative, health-based standard than federal legal limits.

How Hard Water Affects Your Home

At 252 PPM, untreated hard water has measurable effects on household costs and appliance life:

  • Water heater inefficiency: Scale insulation forces the heater to work harder, using more energy (the effect grows with hardness and is largest on gas storage heaters)
  • Soap and detergent: Hard water reduces lathering, requiring significantly more product
  • Appliance replacement: Water heaters, dishwashers, and washing machines fail 2-4 years earlier due to scale buildup
  • Plumbing maintenance: Scale buildup in pipes reduces flow and requires more frequent service

Note: Impact varies by household size, water usage, and local energy costs. A home water test provides the most accurate assessment for your specific situation.

Water quality contaminant levels for Apopka, FL
MeasureResultGuidelineLegal LimitStatus
PFOA (highest entry-point avg.)ND (< 4 ppt)0 ppt (EPA goal)4 ppt (from 2029)✓ Below
PFOS (highest entry-point avg.)12 ppt0 ppt (EPA goal)4 ppt (from 2029)⚠ Above
↳ Total PFAS (average of all samples)2.86 ppt—No total limitDetected
Lead (90th percentile, Dec 2023)0 ppb0 ppb (no safe level)Action level 15 ppb (10 ppb from Nov 2027)✓ Low
Nitrate (EWG data)0.0778 mg/L5 mg/L (CheckMyTap flag, half the limit)10 mg/L✓ OK
Hardness (estimate)~252 PPMNot a health issueNo federal limitVery hard
Total Dissolved Solids (estimate)~444 PPM500 PPM (taste, not enforceable)No federal limitOK
Chlorine / Chloramine (estimate)~1 mg/LTaste threshold ~1.04.0 mg/LNormal

Lithium (EPA testing, Mar 2024–Sep 2024)

Average across 10 samples: 0 µg/L. Highest single result: 0 µg/L. 0 of 10 samples were above 10 µg/L, EPA's Health Reference Level: a non-regulatory screening value, not a legal limit. Lithium has no federal drinking water limit, and EPA says the health risk at these levels is uncertain. Boiling does not remove it. In EPA's study of treatment plants, reverse osmosis removed more than 90% and ion exchange was inconsistent; we found no home filter certified for lithium reduction. What the lithium results mean

Our Top Picks for Apopka (252 PPM)

Hard water at 252 PPM causes scale buildup, increased energy use, and premature appliance failure. A softener protects your plumbing and appliances.

Quick Fix for Chlorine: Shower Filter

At 1 mg/L chlorine, many Apopka residents notice dry skin, brittle hair, and that "pool smell" in the shower. A shower filter installs in 5 minutes, no tools needed.

How to Test Your Water in Apopka

With PFAS at 2.86 ppt in Apopka's supply, confirming your home's specific levels is especially important. PFAS vary by neighborhood and can concentrate differently depending on your position in the distribution system.

Most Accurate: Mail-in Lab Test

Mail-in sample analyzed by an accredited lab for metals (including lead), minerals, and more. PFAS needs a separate PFAS test. For PFAS, order a dedicated PFAS lab test.

Tap Score Lab Kit
Quick Check: DIY Test Strips

Results in 60 seconds. Tests hardness, lead, chlorine, pH, and 13 other parameters. Good enough to confirm whether your home matches the city average.

Varify 17-in-1 Test Strips
Verify Your Softener: TDS Meter

Instant digital reading of total dissolved solids. Handy for checking if your softener is actually working. Test before and after.

HoneForest TDS Meter

Free option: Request City of Apopka Water's annual Consumer Confidence Report for official city-level data.

📊 Already Tested Your Water?

City averages miss neighborhood-level variation. Share your results to help your neighbors get better data.

We review every submission before publishing. Your ZIP is shown; your identity is not.

About Apopka's Water Supply

Water Utility: City of Apopka Water

Water Source: Floridan Aquifer (Groundwater)

Population Served: 71,917

Hardness: 252 PPM (14.7 grains per gallon)

Apopka draws its drinking water from groundwater sources — Floridan Aquifer. Groundwater typically requires less treatment than surface water because the earth acts as a natural filter. The tradeoff: dissolved minerals from underground rock formations, which is why hardness is elevated here. Calcium and magnesium dissolve into the water as it moves through limestone and dolomite. The system serves 72,000 residents.

Water quality can vary by neighborhood and season. For your exact numbers, request City of Apopka Water's Consumer Confidence Report (CCR) or test your own tap.

ZIP Codes In and Near Apopka

This report is for the water system serving Apopka, FL (City of Apopka Water). ZIP codes in and near this area:

32701, 32703, 32704, 32710, 32712, 32714, 32715, 32757, 32768, 32776, 32777, 32779, 32798, 34711, 34712, 34713, 34715, 34729, 34734, 34740, 34755, 34756, 34760, 34761, 34777, 34778, 34786, 34787

A ZIP code can be served by more than one water system. Confirm your utility on your water bill or your utility's Consumer Confidence Report.

Water Softener Sizing for Apopka

At 252 PPM (14.7 GPG), here is how to size a softener for your Apopka home. Multiply hardness in GPG (14.7) by daily water usage (roughly 75 gallons per person). A family of four uses about 300 gallons/day: 14.7 GPG × 300 gal = 4,410 grains/day. Over a 7-day regeneration cycle, that is 30,870 grains - a 32,000-grain softener is the right fit for most Apopka households.

Compare Apopka to Other Florida Cities

Frequently Asked Questions About Apopka Water

Is Apopka tap water safe to drink?
EPA data shows a health concern for Apopka's water system: PFOA/PFOS above EPA's 4 ppt standard at one or more entry points (PFOS 12 ppt; EPA UCMR 5 testing, 2023 to 2025; the standard is enforceable from 2029). A filter certified for the specific contaminant (PFAS, lead) reduces what you drink. See the EPA violations section above for dates and status.
Where does Apopka's water come from?
Apopka's drinking water is sourced from Floridan Aquifer and treated by City of Apopka Water. Groundwater typically has higher mineral content but needs less chemical treatment than surface water. Learn more about Floridan Aquifer
Do I need a water softener in Apopka?
Yes. At 252 PPM (14.7 GPG), Apopka's water is extremely hard. Without a softener, expect visible scale buildup, reduced water heater efficiency, spotted dishes, and soap that doesn't lather well. A salt-based water softener is the standard solution.
How do I remove PFAS from Apopka tap water?
Apopka has PFAS above EPA limits (PFOS: 12 ppt — limit is 4 ppt each). Reverse osmosis and granular activated carbon both reduce PFAS by 95-99%. For most homes, a point-of-use RO system under the kitchen sink is most practical. Look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Standard pitcher filters do not adequately reduce PFAS.
What water filter is best for Apopka?
The best filter depends on which contaminants you want to address. For PFAS, look for NSF/ANSI 53 or 58 certification for PFOA/PFOS reduction. Granular activated carbon and reverse osmosis are both effective. See our softener vs. filter guide for the full breakdown.
Is Apopka water safe for babies and infants?
Caution is warranted for Apopka water and infant formula. Concerns: PFAS above EPA limits (PFOS: 12 ppt). Use filtered water (reverse osmosis or NSF-certified) or bottled water for formula preparation.
Does Apopka water damage tankless water heaters?
Yes. Most manufacturers recommend below 7-11 GPG (120-188 PPM). At 14.7 GPG, Apopka's water exceeds this. Scale buildup in the heat exchanger reduces efficiency and can void warranties. A water softener upstream is the standard solution.
Do I need both a softener AND a filter in Apopka?
In Apopka, yes — they solve different problems. A softener removes hardness minerals (252 PPM) that cause scale and soap scum. A filter removes contaminants like PFOA/PFOS (up to 12 ppt). Install the softener first (whole-house), then a point-of-use filter at the kitchen sink for drinking water.

Data sources: Water system, health-based violations, and lead (90th percentile) from the EPA Safe Drinking Water Information System via ECHO (data as of October 14, 2026). PFAS and lithium from EPA's final UCMR 5 dataset (sampling 2023 to 2025, released August 2026). Disinfection byproducts, chromium-6, nitrate, and other contaminant values and health-guideline comparisons are from the Environmental Working Group (EWG) Tap Water Database (data as of Feb 2026); EWG health guidelines are stricter than legal limits and are not EPA standards. Hardness, TDS, and chlorine are estimates, not utility measurements. Results describe the water system, not your tap: lead in particular depends on your home's plumbing. For your utility's latest results, request its Consumer Confidence Report (CCR). Our methodology · Report a data error. Page data refreshed 2026-11-01.

Common Options for Apopka Homes

Prioritized for contaminant reduction for homes with 252 PPM water and PFAS above EPA limits.

Affiliate disclosure: we may earn a commission. Selection based on Apopka's water data.

On a private well? This report covers Apopka's municipal water only. Interpret your well water lab report

💧 What Does Your Water Need?

Find the right system for Apopka in 60 seconds.

Take the Quiz →

🧪 Test Your Water at Home

City averages may not match your tap. Test for exact numbers.

How to test your water →