Benton vs Rogers Water Quality
Side-by-side water quality comparison for two Arkansas cities.
If you are comparing Benton and Rogers water quality - whether moving, choosing between the two, or curious about a relative's water - here is what the data shows.
Hardness comparison
Benton has somewhat harder water at 90 PPM versus Rogers at 85 PPM, a difference of 5 PPM. Rogers has moderate hardness where a softener is optional.
Water sources and why they differ
Water sources differ: Benton draws from Saline County wells, while Rogers uses Beaver Lake. Both use similar source types, but local geology creates the hardness variation.
What this means for you
Not sure what your specific situation needs? Take the quiz to get a recommendation based on your water data, budget, and household size.
| Metric | Benton | Rogers |
|---|---|---|
| Hardness | 90 PPM | 85 PPM |
| GPG | 5.3 | 5 |
| TDS | 155 PPM | 119 PPM |
| PFAS | 0 ppt | 0 ppt |
| Lead | 1 ppb | 1 ppb |
| Chlorine | 1.3 mg/L | 1.2 mg/L |
| Level | Moderately Hard | Moderately Hard |
FAQ
Which has harder water, Benton or Rogers?
Benton has harder water at 90 PPM compared to Rogers at 85 PPM. That is a difference of 5 PPM.
Do I need a water softener if I move from Rogers to Benton?
Probably not. At 90 PPM, the water is manageable without a softener for most homes.
Is Rogers water safe to drink?
Rogers water meets EPA safety standards. No contaminants exceed health guidelines in our data.